Page 44 -

Materials for Microelectromechanical Systems 2-25

Kim, T.W., Gogoi, B., Goldman, K.G., McNeil, A.C., Rivette, N.J., Garling, S.E., and Koch, D.J. (1998)
“Substrate and Annealing Influences on the Residual Stress of Polysilicon,” in Technical Digest:
Solid-State Sensor and Actuator Workshop, 8–11 June, Hilton Head, SC, pp. 237–40.
Lang, W., Steiner, P., and Sandmaier, H. (1995) “Porous Silicon: A Novel Material for Microsystems,”
Sensor. Actuator. A 51, pp. 31–36.
Lange, P., Kirsten, M., Riethmuller, W., Wenk, B., Zwicker, G., Morante, J.R., Ericson, F., and Schweitz, J.A.
(1996) “Thick Polycrystalline Silicon for Surface-Micromechanical Applications: Deposition,
Structuring, and Mechanical Characterization,” Sensor. Actuator. A 54, pp. 674–78.
Leclerq, J., Ribas, R.P., Karam, J.M., and Viktorovitch, P. (1998) “III–V Micromachined Devices for
Microsystems,” Microelectron. J. 29, pp. 613–19.
Lee, C., Itoh, T., and Suga, T. (1996) “Micromachined Piezoelectric Force Sensors Based on PZT Thin
Films,” IEEE Trans. Ultrason. Ferroelectr. Freq. Control 43, pp. 553–59.
Leith, S.D., and Schwartz, D.T. (1999) “High-Rate Through-Mold Electrodeposition of Thick (>200
micron) NiFe MEMS Components with Uniform Composition,” J. MEMS 8, pp. 384–92.
Li, B., Xiong, B., Jiang, L., Zohar, Y., and Wong, M. (1999) “Germanium as a Versatile Material for Low-
Temperature Micromachining,” J. MEMS 8, pp. 366–72.
Liu, R., Vasile, M.J., and Beebe, D.J. (1999) “The Fabrication of Nonplanar Spin-On Glass
Microstructures,” J. MEMS 8, pp. 146–51.
Lohner, K., Chen, K.S., Ayon, A.A., and Spearing, M.S. (1999) “Microfabricated Silicon Carbide
Microengine Structures,” Mater. Res. Soc. Symp. Proc. 546, pp. 85–90.
Mahadevan, R., Mehregany, M., and Gabriel, K.J. (1990) “Application of Electric Microactuators to Silicon
Micromechanics,” Sensor. Actuator. A 21–23, pp. 219–25.
Maseeh, F., and Senturia, D.D. (1990) “Plastic Deformation of Highly Doped Silicon,” Sensor. Actuator. A
21–22, pp. 861–65.
Monk, D.J., Soane, D.S., and Howe, R.T. (1993) “Enhanced Removal of Sacrificial Layers for Silicon
Surface Micromachining,” in Technical Digest: The 7th Int. Conf. on Solid-State Sensors and
Actuators, June, Yokohama, June 7–10, 1993, pp. 280–83.
Mulhern, G.T., Soane, D.S., and Howe, R.T. (1993) “Supercritical Carbon Dioxide Drying of
Microstructures,” in Technical Digest: 7th Int. Conf. on Solid-State Sensors and Actuators, June,
Yokohama, June 7–10, 1993, pp. 296–99.
Pilskin, W.A. (1977) “Comparison of Properties of Dielectric Films Deposited by Various Methods,”
J. Vac. Sci. Technol. 21, pp. 1064–81.
Rajan, N., Mehregany, M., Zorman, C.A., Stefanescu, S., and Kicher, T. (1999) “Fabrication and Testing of
Micromachined Silicon Carbide and Nickel Fuel Atomizers for Gas Turbine Engines,” J. MEMS 8,
pp. 251–57.
Ramesham, R. (1999) “Fabrication of Diamond Microstructures for Microelectromechanical Systems
(MEMS) by a Surface Micromachining Process,” Thin Solid Films 340, pp. 1–6.
Rangsten, P., Bjorkman, H., and Hjort, K. (1999) “Microfluidic Components in Diamond,” in Proc. of the
10th Int. Conf. on Solid-State Sensors and Actuators, 7–10 June, Sendai, Japan, pp. 190–93.
Rosler, R.S. (1977) “Low Pressure CVD Production Processes for Poly, Nitride, and Oxide,” Solid State
Technol. 20, pp. 63–70.
Schmidt, M.A., Howe, R.T., Senturia, S.D., and Haritonidis, J.H. (1988) “Design and Calibration
of a Microfabricated Floating-Element Shear-Stress Sensor,” Trans. Electron. Devices ED-35,
pp. 750–57.
Seassal, C., Leclercq, J.L., and Viktorovitch, P. (1996) “Fabrication of InP-Based Freestanding
Microstructures by Selective Surface Micromachining,” J. Micromech. Microeng. 6, pp. 261–65.
Sedky, S., Fiorini, P., Caymax, M., Loreti, S., Baert, K., Hermans, L., and Mertens, R. (1998) “Structural
and Mechanical Properties of Polycrystalline Silicon Germanium for Micromachining
Applications,” J. MEMS 7, pp. 365–72.
Sekimoto, M., Yoshihara, H., and Ohkubo, T. (1982) “Silicon Nitride Single-Layer X-ray Mask,”J. Vac. Sci.
Technol. 21, pp. 1017–21.

© 2006 by Taylor & Francis Group, LLC