Page 43 -
P. 43

2-24                                                             MEMS: Design and Fabrication


             Ding, X., Ko, W.H., and  Mansour, J. (1990)  “Residual  and  Mechanical  Properties  of Boron-Doped
                  p  Silicon Films,” Sensor. Actuator. A 21–23, pp. 866–71.
             Fleischman, A.J., Roy, S., Zorman, C.A., and Mehregany, M. (1996) “Polycrystalline Silicon Carbide for
                  Surface  Micromachining,” in  Proc. 9th  Int. Workshop  on  Microelectromechanical  Systems, 11–15
                  February, San Diego, pp. 234–38.
             Fleischman, A.J., Wei, X., Zorman, C.A., and  Mehregany, M. (1998)  “Surface  Micromachining  of
                  Polycrystalline SiC Deposited on SiO by APCVD,” Mater. Sci. Forum 264–68, pp. 885–88.
                                                    2
             Fobelets, K., Vounckx, R., and Borghs, G. (1994) “A GaAs Pressure Sensor Based on Resonant Tunnelling
                  Diodes,’’ J. Micromech. Microeng. 4, pp. 123–28.
             Folkmer, B., Steiner, P., and Lang, W. (1995) “Silicon Nitride Membrane Sensors with Monocrystalline
                  Transducers,” Sensor. Actuator. A 51, pp. 71–75.
             Franke, A., Bilic, D., Chang, D.T., Jones, P.T., King, T.J., Howe, R.T., and Johnson, C.G. (1999) “Post-
                  CMOS  Integration  of Germanium  Microstructures,” in  Proc. 12th  Int. Conf. on
                  Microelectromechanical Systems, 17–21 January, Orlando, pp. 630–37.
             Franke, A.E., Jiao, Y., Wu, M.T., King, T.J., and Howe, R.T. (2000) “Post-CMOS Modular Integration of
                  Poly-SiGe Microstructures Using Poly-Ge Sacrificial Layers,” in Technical Digest: Solid-State Sensor
                  and Actuator Workshop, 4–8 June, Hilton Head, SC, pp. 18–21.
             French, P.J., Sarro, P.M., Mallee, R., Fakkeldij, E.J.M., and Wolffenbuttel, R.F. (1997) “Optimization of a
                  Low-Stress Silicon Nitride Process for Surface Micromachining Applications,” Sensor. Actuator. A
                  58, pp. 149–57.
             Funk, K., Emmerich, H., Schilp, A., Offenberg, M., Neul, R., and  Larmer, F. (1999)  “A  Surface
                  Micromachined Silicon Gyroscope Using a Thick Polysilicon Layer,” in Proc. 12th Int. Conf. on
                  Microelectromechanical Systems, 17–21 January, Orlando, pp. 57–60.
             Gennissen, P., Bartek, M., French, P.J., and Sarro, P.M. (1997) “Bipolar-Compatible Epitaxial Poly for
                  Smart Sensors: Stress Minimization and Applications,” Sensor. Actuator. A 62, pp. 636–45.
             Ghandhi,S.K.(1983) VLSI Fabrication Principles: Silicon and Gallium Arsenide,John Wiley & Sons,New York.
             Greek, S., Ericson, F., Johansson, S., Furtsch, M., and Rump, A. (1999) “Mechanical Characterization of
                  Thick Polysilicon Films: Young’s Modulus and Fracture Strength Evaluated with Microstructures,”
                  J. Micromech. Microeng. 9, pp. 245–51.
             Guckel, H., Randazzo, T., and  Burns, D.W. (1985)  “A  Simple  Technique  for  the  Determination  of
                  Mechanical Strain in Thin Films with Application to Polysilicon,” J. Appl. Phys. 57, pp. 1671–75.
             Guckel, H., Burns, D.W., Visser, C.C.G., Tilmans, H.A.C., and Deroo, D. (1988) “Fine-Grained Polysilicon
                  Films with Built-In Tensile Strain,” IEEE Trans. Electron. Devices ED-35, pp. 800–1.
             Guckel, H., Sniegowski, J.J., Christianson, T.R., and Raissi, F. (1990) “The Applications of Fine-Grained
                  Polysilicon to Mechanically Resonant Transducers,” Sensor. Actuator. A 21–23, pp. 346–51.
             Hahm, G., Kahn, H., Phillips, S.M., and Heuer, A.H. (2000) “Fully Microfabricated Silicon Spring Biased
                  Shape  Memory  Actuated  Microvalve,” in  Technical  Digest:  Solid-State  Sensor  and  Actuator
                  Workshop, 4–8 June, Hilton Head, SC, pp. 230–33.
             Heck, J.M., Keller, C.G., Franke, A.E., Muller, L., King, T.-J., and Howe, R.T. (1999) “High Aspect Ratio
                  Polysilicon–Germanium  Microstructures,” in  Proc. 10th  Int. Conf. on  Solid-State  Sensors  and
                  Actuators, 7–10 June, Sendai, Japan, pp. 328–34.
             Hjort, K. (1996) “Sacrificial Etching of III–V Compounds for Micromechanical Devices,” J. Micromech.
                  Microeng. 6, pp. 370–75.
             Hjort, K., Soderkvist, J., and  Schweitz, J.-A. (1994)  “Galium  Arsenide  as  a  Mechanical  Material,”
                  J. Micromech. Microeng. 4, pp. 1–13.
             Honer, K., and Kovacs, G.T.A. (2000) “Sputtered Silicon for Integrated MEMS Applications,” in Technical
                  Digest: Solid-State Sensor and Actuator Workshop, 4–8 June, Hilton Head, SC, pp. 308–11.
             Howe, R.T., and Muller, R.S. (1983) “Stress in Polysilicon and Amorphous Silicon Thin Films,” J. Appl.
                  Phys. 54, pp. 4674–75.
             Kamins, T. (1998) Polycrystalline Silicon for Integrated Circuits and Displays, 2nd ed., Kluwer Academic,
                  Berlin.



             © 2006 by Taylor & Francis Group, LLC
   38   39   40   41   42   43   44   45   46   47   48