Page 58 - Make Your Own PCBs with EAGLE from Schematic Designs to Finished Boards
P. 58
FIGURE 2-24 Autorouting dialog.
We can come back to what all these options mean in Chapter 5. For now, though, just accept the
defaults and click the “OK” button. The board will be routed before your very eyes. If the routing is
successful, then the status bar will say Ratsnest: Nothing to do. If for some reason the
autorouter was unable to eliminate all the air wires, then the message would tell you how many air
wires remained. You could then route them manually or change the parameters in the autorouting
dialog and try again. Figure 2-25 shows the final layout of the board.
