Page 57 - Make Your Own PCBs with EAGLE from Schematic Designs to Finished Boards
P. 57
FIGURE 2-23 The board resized.
Routing
The next stage of the process is to route the tracks. EAGLE can automatically route your design for
you, and for a simple design like this, we might just as well let it. In Chapter 5, we will look at laying
out PCBs by hand.
To start the “Autorouting” tool, click on the “Auto” button in the “Tool” palette. The icon looks a
bit like a grid and is immediately to the right of the “Ratsnest” icon. This will launch the autorouting
dialog (Figure 2-24).
