Page 95 - Make Your Own PCBs with EAGLE from Schematic Designs to Finished Boards

FIGURE 4-12 Connecting a net to a bus.

At the display end of the bus, you connect nets from the display to the bus using the corresponding
slot names.

Worked Example

Now that you are familiar with the tools available to us with the Schematic Editor, we can start
building up a second example schematic. The example project is a sound meter. This will use an
amplifier chip, a bar-code chip, and a set of LEDs. In Chapter 5, we will design first a through-hole
and then a surface-mount version of the PCB layout for the example.
Figure 4-13 shows the finished schematic that we are aiming for. You will notice that it looks

considerably more professional than the schematic from Chapter 2.