Page 207 - Mastering SolidWorks

|
176 CHAPTER 5 Using VisUalization techniqUes

Figure 5.38
color propertyManager
and the appearances
task pane

11. To prevent the Appearance window from closing after every change, click the pushpin at
the top of the window.
12. Click the green checkmark icon to accept the changes. Note that with the pushpin icon
selected, the window remains available.

13. Expand the flyout FeatureManager in the upper-left corner of the graphics window, as
shown in Figure 5.39, so all the features in the part are visible.
14. Select the features Extrude1, Fillet7, and Fillet6 from the FeatureManager so they are
displayed in the Selection list of the Color FeatureManager. Select a color from the
BibleColors swatch palette that you just created.
15. Click the checkmark icon to accept the changes and clear the Selection list.
16. Select the inside face of the large cylindrical hole through the part, and assign a separate
color to the face.