Page 413 - Organic Electronics in Sensors and Biotechnology

390 Chapter Ten

18. H. C. Hamaker, Formation of deposition by electrophoresis, Trans. Farad Soc.
35:279–283 (1940).
19. A. I. Avgustinik, V. S. Vigdergauz, and G. I. Zharavlev, Electrophoretic deposi-
tion of ceramic masses from suspension and calculation of deposit yields, J.
Appl. Chem. USSR (English translation) 35:2175–2180 (1962).
20. P. M. Biesheuvel and H. Verweij, Theory of cast formation in electrophoretic
deposition, J. Am. Ceram. Soc. 82:1451–1455 (1999).
21. T. Ishihara, K. Shimise, T. Kudo, H. Nishiguchi, T. Akbay, and Y. Takita,
Preparation of yttria-stabilised zirconia thin-films on strontium doped
LaMnO cathode substrate via electrophoretic deposition for solid oxide fuel
3
cells, J. Am. Ceram. Soc. 83:1921–1927 (2000).
22. F. Chen and M. Liu, Preparation of yttria-stabilised zirconia (YSZ) films on
La Sr MnO (LSM) and LSM-YSZ substrate using an electrophoretic depo-
0.85 0.15 3
sition (EPD) process, J. Eur. Ceram. Soc. 21:127–134 (2001).
23. N. Sato, M. Kawachi, K. Noto, N. Yoshimoto, and M. Yoshizawa, Effect of
particle size reduction on crack formation in electrophoretically deposited
YBCO films, Physica C 357–360:1019–1022 (2001).
24. R. W. Powers, The electrophoretic forming of beta-alumina ceramic, J.
Electrochem. Soc. 122:482–486 (1975).
25. B. Ferrari and R. Moreno, The conductivity of aqueous Al O slips for electro-
2 3
phoretic deposition, Mater. Lett. 28:353–355 (1996).
26. B. Ferrari and R. Moreno, Electrophoretic deposition of aqueous alumina slip,
J. Eur. Ceram. Soc. 17:549–556 (1997).
27. H. G. Krueger, A. Knote, U. Schindler, H. Kern, and A. Boccaccini, Composite
ceramic metal coatings by means of combined electrophoretic deposition, J.
Mater. Sci. 39:839–844 (2004).
28. M. Zarbov and I. Schuster, Methodology for selection of charging agents
for electrophoretic deposition of ceramic particles, Proceedings of the interna-
tional symposium on electrophoretic deposition: fundamentals and applications, The
Electrochemical Society Inc, USA, Proc. 2002–21:39–46 (2002).
29. C. Y. Chen, S. Y. Chen, and D. M. Liu, Electrophoretic deposition forming of
porous alumina membranes, Acta Mater, 47:2717–2726 (1999).
30. G. Wang, P. Sarkar, and P. S. Nicholson, Influence of acidity on the electrostatic
stability of alumina suspensions in ethanol, J. Am. Ceram. Soc. 80:965–972
(1997).
31. J. Ma, R. Zhang, C. H. Liang, and L. Weng, Colloidal characterization and
electrophoretic deposition of PZT, Mater. Lett. 57:4648–4654 (2003).
32. S. A. Troelstra, Applying coatings by electrophoresis, Philips Tech. Rev. 12:293–
303 (1951).
33. I. Zhitomirsky, Electrophoretic deposition of hydroxyapatite, J. Mater. Sci.
Mater. Med. 8:213–219 (1997).
34. R. N. Basu, C. A. Randall, and M. J. Mayo, Fabrication of dense zirconia elec-
trolyte films for tubular solid oxide fuel cells by electrophoretic deposition, J.
Am. Ceram. Soc. 84:33–40 (2001).
35. H. Negishi, H. Yanagishita, and H. Yokokawa, Electrophoretic deposition of
solid oxide fuel cell material powders, Proceedings of the electrochemical society
on electrophoretic deposition: Fundamentals and applications, Pennington, USA,
2002–21:214–221 (2002).
36. L. Vandeperre, O. Van Der Biest, and W. J. Clegg, Silicon carbide laminates
with carbon interlayers by electrophoretic deposition. Key. Eng. Mater. (Pt. 1,
Ceramic and Metal Matrix Composites) 127–131:567–573 (1997).
37. Z. Peng and M. Liu, Preparation of dense platinum-yttria stabilized zirconia
and yttria stabilized zirconia films on porous La Sr MnO (LSM) substrates.
0.9 0.1 3
J. Am. Ceram. Soc. 84:283–288 (2001).
38. K. Hasegawa, S. Kunugi, M. Tatsumisago, and T. Minami, Preparation of thick
films by electrophoretic deposition using modified silica particles derived by
sol–gel method. J. Sol–gel Sci. Technol. 15:243–249 (1999).
39. M. Abdollahi, S. N. Ashrafizadeh, and A. Malekpour, Preparation of zeo-
lite ZSM-5 membrane by electrophoretic deposition method, Microporous &
Mesoporous Mater. 106:192–200 (2007).