Page 69 - PDA Robotics Using Your Personal Digital Assistant to Control Your Robot
P. 69
PDA 05 5/30/03 11:35 AM Page 45
Chapter 5 / The Electronics
Figure 5.3
IPAQ and Visor
PDAs.
a slot on the top plate and stand the PDA vertically. Figure 5.3 shows
an iPAQ and a Visor positioned next to the transceiver.
For this project, I used the MG Chemical process to create the circuit
board. Protel 98 SE was used to create the schematic diagrams and
printed circuit board (PCB) artwork used in the MG chemical process.
Figure 5.4 shows the main portion of the circuit board after it was
Figure 5.4
The main circuit
after exposure and
etching.
45
