Page 126 - The Mechatronics Handbook

0066_Frame_C08 Page 17 Wednesday, January 9, 2002 3:48 PM

Johnson et al., “Electrophysics of micromechanical comb actuators,” Journal of Microelectromechanical
Systems, 4(1), pp. 49–59, 1995.
Hopkins, Design Analysis of Shafts and Beams, 2nd Ed., Malabar, FL: RE Kreiger, 1987.
Huang, Q.A., Lee, N.K.S., “Analysis and design of polysilcon thermal flexture actuator,” Journal of Micro-
mechanics and Microengineering, 9, pp. 64–70, 1999.
Kittel, Ch., Introduction to Solid State Physics, John Wiley & Sons, Inc., New York, 1996.
Laurent, G., Piat, E., “High efficiency swimming microrobot using ionic polymer metal composite actua-
tors,” to appear in 2001.
Liew, L. et al., “Modeling of thermal actuator in a bulk micromachined CMOS micromirror,” Microelec-
tronics Journal, 31(9–10), pp. 791–790, 2000.
Maugin, G., Continuum Mechanics of Electromagnetic Solids, Elsevier, Amsterdam, The Netherlands, 1988.
Mendelson, Plasticity: Theory and Application, Macmillan, New York, 1968.
Nye, J.F., Physical Properties of Crystals, Oxford University Press, London, 1960.
Onishi, K., Sewa, Sh., Asaka, K., Fujiwara, N., Oguro, K., “Bending response of polymer electrolyte
actuator,” in Smart Structures and Materials 2000, Newport Beach, CA, SPIE vol. 3987, March, 2000.
Peterson, “Dynamic micromechanics on silicon: techniques and devices,” IEEE, 1978.
Rohani, M.R., Hicks, G.R., “Multidisciplinary design and prototype of a micro air vehicle,” Journal of
Aircraft, 36(1), p. 237, 1999.
Timoshenko, S., Woinowsky-Krieger, S., Theory of Plates and Shells, McGraw-Hill, New York, 1959.
Wood, R. et al., “MEMS microrelays,” Mechatronics, 8, pp. 535–547, 1998.
Xue, T., Trent, Y.S., Osseo-Asare, K., “Characterization of nafion membranes by transmision electron
microscopy,” Journal of Membrane Science, 45, p. 261, 1989.
Zgonik et al., ‘‘Dielectric, elastic, piezoelectric, electro-optic and elasto-optic tensors of BaTiO 3 crystals,”
Physical Review B, 50(9), p. 5841, 1994.

©2002 CRC Press LLC