Page 181 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Part Modeling

5.9. - The two edges are projected onto the sketch plane and are automatically

fully defined since they are a projected copy of the edges they came from, and at

the same time adding an "On Edge" geometric relation. One advantage of using

"Convert Entities" is if the original geometry changes, so will the converted

entities.

Q Girde

Relations(On Edge )

CD Fully Defined

Add Relations

Options

0 For construction

Parameters

~ 1 o.ooo I ~

Making an "Extruded Cut" feature using nested closed loops (one inside the other)

will result in removing the material between both entities. Use "Extruded Cut"

using the "Blind" option 0.063" deep, going to the right. Rename the new feature

"Offset Groove."

[j Gut-Extrude

../ X

From

Sketch Plane v

Direction 1

~ Blind v

,.-----==============~

0.063in

cut

EEl

Draft outward

0 Direction 2

"

175