Page 157 - MEMS Mechanical Sensors

146 Pressure Sensors

[14] Stankevic, V., and C. Šimkevicius, “Use of a Shock Tube in Investigations of Micromachined
Piezoresistive Pressure Sensors,” Sensors and Actuators, Vol. 86, 2000, pp. 58–65.
[15] Entran EPIH series data sheet, http://www.entran.com.
[16] Entran EPO series data sheet, http://www.entran.com.
[17] Kanda, Y., “Graphical Representation of Piezoresistive Coefficients in Silicon,” IEEE
Trans. Electron Devices, ED-29, 1982, pp. 64–70.
[18] Clark, S. K., and K. D. Wise, “Pressure Sensitivity in Anisotropically Etched Thin-
Diaphragm Pressure Sensors,” IEEE Trans. Electron Devices, ED-26, 1979, pp.
1887–1896.
[19] Elgamel, H. E., “Closed-Form Expressions for the Relationships Between Stress, Dia-
phragm Deflection, and Resistance Change with Pressure in Silicon Piezoresistive Pressure
Sensors,” Sensors and Actuators, Vol. A50, 1995, pp. 17–22.
[20] Lin, L., H.-C. Chu, and Y.-W. Lu, “A Simulation Program for the Sensitivity and Linearity
of Piezoresistive Pressure Sensors,” IEEE Journal of Microelectromechanical Systems, Vol.
8, No. 4, December 1999, pp. 514–522.
[21] Goldman, K., et al., “A Vertically Integrated Media-Isolated Absolute Pressure Sensor,”
Sensors and Actuators, Vol. A66, 1998, pp. 155–159.
[22] Marek, J., and M. Illing, “Micromachined Sensors for Automotive Applications,” Proc. of
IEEE Sensors 2002, 1st Int. Conf. on Sensors, Vol. 2, Orlando, FL, June 12–14, 2002, pp.
1561–1564.
[23] Czarnocki, W. S., “Media-Isolated Sensor,” Sensors and Actuators, Vol. A67, 1998, pp.
142–145.
[24] Matsuoka, Y., et al., “Low-Pressure Measurement Limits for Silicon Piezoresistive Circular
Diaphragm Sensors,” J. Micromech. Microeng., Vol. 5, 1995, pp. 32–35.
[25] Sandmaier, H., and K. Kuhl, “A Square-Diaphragm Piezoresistive Pressure Sensor with a
Rectangular Central Boss for Low Pressure Ranges,” IEEE Trans. on Electron Devices, Vol.
40, No. 10, 1993, pp. 1754–1759.
[26] Kanda, Y., and A. Yasukawa, “Optimum Design Considerations for Silicon Piezoresistive
Pressure Sensors,” Sensors and Actuators, Vol. A62, 1997, pp. 539–542.
[27] Wu, X. P., “A New Pressure Sensor with Inner Compensation for Nonlinearity and Protec-
tion to Overpressure,” Sensors and Actuators, Vol. 21, Issue 1–3, 1990, pp. 65–69.
[28] Johnson, R., et al., “A High-Sensitivity Ribbed and Bossed Pressure Transducer,” Sensors
and Actuators, Vol. A35, 1992, pp. 93–99.
[29] Dziuban, J., et al., “Self-Compensating Piezoresistive Pressure Sensor” Sensors and Actua-
tors, Vol. A41–42, 1994, pp. 368–374.
[30] Boukabache, A., et al., “Characterization and Modelling of the Mismatch of TCRs and
Their Effects on the Drift of the Offset Voltage of Piezoresistive Pressure Sensors,” Sensors
and Actuators, Vol. 84, 2000, pp. 292–296.
[31] Suzuki, K., et al., “Nonlinear Analysis of a CMOS Integrated Silicon Pressure Sensor,”
IEEE Trans. Electron Devices, ED-34, 1987, pp. 1360–1367.
[32] Akbar, M., and M. A. Shanblatt, “A Fully Integrated Temperature Compensation Tech-
nique for Piezoresistive Pressure Sensors,” IEEE Trans. Instrumentation and Measurement,
Vol. 42, No. 3, June 1993.
[33] Bryzek, J., et al., Silicon Sensors and Microstrauctures, Fremont, CA: Novasensor, 1990.
[34] Diem, B., et al., “SOI ‘SIMOX’: From Bulk to Surface Micromachining, a New Age for Sili-
con Sensors and Actuators,” Sensors and Actuators, Vol. A46, 1995, pp. 8–16.
[35] Diem, B., et al., “‘SIMOX’: A Technology for High-Temperature Silicon Sensors,” Sensors
and Actuators, Vol. A23, 1990, pp. 1003–1006.
[36] von-Berg, J., et al., “A Piezoresistive Low-Pressure Sensor Fabricated Using Silicon-on-
Insulator (SOI) for Harsh Environments,” TRANSDUCERS ’01, EUROSENSORS XV,
11th International Conference on Solid-State Sensors and Actuators, Digest of Technical
Papers, Vol. 1, 2001, pp. 482–485.