Page 161 - MEMS Mechanical Sensors

150 Pressure Sensors

[99] Buff, W., et al., “Universal Pressure and Temperature SAW Sensor for Wireless Applica-
tions,” Proc. 1997 Ultrasonics Symp., Toronto, Canada, October 5–8, 1997, Vol. 1, pp.
359–362.
[100] Canali, C., et al., “Piezoresistivity Effects in MOS-FET Useful for Pressure Transducers,” J.
Phys. D:Appl. Phys., Vol. 12, 1979, pp. 1973–1983.
[101] Alcántara, S., et al., “MOS Transistor Pressure Sensor,” Proc. IEEE Int. Conf. on Devices,
Circuits & Systems (ICCDCS ’98), Venezuela, 1998, pp. 381–285.
[102] Okojie, R. S., and N. Carr, “An Inductively Coupled High Temperature Silicon Pressure
Sensor,” Proc. 6th IOP Conf. on Sensors and Their Applications, Manchester, England,
September 12–15, 1993, pp. 135–140.
[103] Wang, Y., and M. Esashi, “The Structures for Electrostatic Servo Capacitive Vacuum Sen-
sors,” Sensors and Actuators, Vol. A66, 1998, pp. 213–217.
[104] Gogoi, B. P., and C. H. Mastrangelo, “A Low-Voltage Force Balanced Pressure Sensor with
Hermetically Sealed Servomechanism,” Proc. 12th IEEE Intl. Workshop on MEMS,
Orlando, FL, January 17–21, 1999, pp. 493–498.
[105] Park, J.-S., and Y. B. Gianchandani, “A Servo-Controlled Capacitive Pressure Sensor Using
a Capped-Cylinder Structure Microfabricated by a Three-Mask Process,” J. MEMS, Vol.
12, No. 2, April 2003, pp. 209–220.
[106] Scheeper, P. R., et al., “A Review of Silicon Microphones,” Sensors and Actuators, Vol.
A44, 1994, pp. 1–11.
[107] Kressman, R., K. Klaiber, and G. Hess, “Silicon Condenser Microphones with Corrugated
Silicon Oxide/Nitride Electret Membranes,” Sensors and Actuators, Vol. A100, 2002, pp.
301–309.
[108] Yoo, K., et al., “Fabrication of Biomimetic 3-D Structured Diaphragms,” Sensors and
Actuators, Vol. A97–98, 2002, pp. 448–456.
[109] Miao, J., et al., “Design Considerations in Micromachined Silicon Microphones,” Microe-
lectronics Journal, Vol. 33, 2002, pp. 21–28.
[110] Kronast, W., et al., “Single-Chip Condenser Microphone Using Porous Silicon as a Sacrifi-
cial Layer for the Air Gap,” Sensors and Actuators, Vol. A87, No. 3, 2001, pp. 188–93.
[111] Hsu, P.-C., C. H. Mastrangelo, and K. D. Wise, “A High Sensitivity Polysilicon Condenser
Microphone,” Proc. 11th IEEE Intl. Workshop on MEMS, Heidelberg, Germany, June
25–29, 1998, pp. 580–585.
[112] Brauer, M., et al., “Silicon Microphone Based on Surface and Bulk Micromachining,” J.
Micromech. Microeng., Vol. 11, 2001, pp. 319–322.
[113] Zou, Q. B., et al., “Design and Fabrication of a Novel Integrated Floating-Electrode-
‘Electret’-Microphone (FEEM),” Proc. 11th IEEE Intl. Workshop on MEMS, Heidelberg,
Germany, June 25–29, 1998, pp. 586–590.
[114] Li, X., et al., “Sensitivity Improved Silicon Condenser Microphone with a Novel Single
Deeply Corrugated Diaphragm,” Sensors and Actuators, Vol. A92, 2001, pp. 257–262.
[115] Kabir, A. E., et al., “High Sensitivity Acoustic Transducers with Thin p+ Membranes and
Gold Back Plate,” Sensors and Actuators, Vol. A78, 1999, pp. 138–142.
[116] Scheeper, P. R., et al., “Fabrication of Silicon Condenser Microphones Using Single Wafer
Technology,” J. Microelectromechanical Systems, Vol. 1, No. 3, September 1993, pp.
147–203.
[117] Rombach, P., et al., “The First Low Voltage, Low Noise Differential Silicon Microphone,
Technology Development and Measurement Results,” Sensors and Actuators, Vol. 95,
2002, pp. 196–201.
[118] Chowdhury, S., et al., “A MEMS Implementation of an Acoustical Sensor Array,” Proc.
IEEE Int. Symp. on Circuits and Systems (ISCAS 2001), Sydney, Australia, May 6–9, 2001,
Vol. 2, pp. 273–276.
[119] Bernstein, J., et al., “Advanced Micromachined Condenser Microphone,” Proc. 1994 Solid
State Sensor and Actuator Workshop, Hilton Head, SC, June 13–16, 1994, pp. 73–77.