Page 160 - MEMS Mechanical Sensors

6.7 Conclusions 149

[79] Greeenwood, J., and T. Wray, “High Accuracy Pressure Measurement with a Silicon Reso-
nant Sensor,” Sensors and Actuators, Vol. A37–38, 1993, pp. 82–85.
[80] Harada, K., et al., “Various Applications of Resonant Pressure Sensor Chip Based on 3-D
Micromachining,” Sensors and Actuators, Vol. A73, 1999, pp. 261–266.
[81] Ikeda, K., et al., “Silicon Pressure Sensor Integrates Resonant Strain Gauge on Dia-
phragm,” Sensors and Actuators, Vol. A21–23, 1990, pp. 146–150.
[82] Ikeda, K., et al., “Three-Dimensional Micromachining of Silicon Pressure Sensor Integrat-
ing Resonant Strain Gauge on Diaphragm,” Sensors and Actuators, Vol. A21–23, 1990,
pp. 1007–1010.
[83] Petersen, K., et al., “Resonant Beam Pressure Sensor Fabricated with Silicon Fusion Bond-
ing,” Proc. 6th Intl. Conf. on Solid State Sensors and Actuators (Transducers ’91), San
Francisco, CA, June 1991, pp. 664–667
[84] Welham, C. J., J. W. Gardner, and J. Greewood, “A Laterally Driven Micromachined Reso-
nant Pressure Sensor,” Proc. 8th Int. Conf. on Solid State Sensors and Actuators (Transduc-
ers ’95) and Eurosensors IX, Stockholm, Sweden, June 25–29, 1995, pp. 586–589.
[85] Beeby S. P., et al., “Micromachined Silicon Resonant Stain Gauges Fabricated Using SOI
Wafer Technology,” IEEE J. Microelectromechanical Systems, Vol. 9, No. 1, March 2000,
pp. 104–111.
[86] Melvås, P., E. Kälvesten, and G. Stemme, “A Surface Micromachined Resonant Beam Pres-
sure Sensor,” IEEE J. Microelectromechanical Systems, Vol. 10, No. 4, December 2001,
pp. 498–502.
[87] Stemme, E., and G. Stemme, “A Balanced Dual-Diaphragm Resonant Pressure Sensor in
Silicon,” IEEE Trans. Electron Devices, Vol. 37, No. 3, March 1990, pp. 648–653.
[88] Melin, J., et al., “A Low-Pressure Encapsulated Deep Reactive Ion Etched Resonant Pres-
sure Sensor Electrically Excited and Detected Using Burst Technology,” J. Micromech.
Microeng., Vol. 10, 2000, pp. 209–217.
[89] Andrews, M. K., et al., “A Miniature Resonating Pressure Sensor,” Microelectronics Jour-
nal, Vol. 24, 1993, pp. 831–835.
[90] Karrer, H. E., and J. Leach, “A Quartz Resonator Pressure Transducer,” IEEE Trans. Indus-
trial Electronics and Control Instrumentation, Vol. IECI-16, No. 1, July 1969, pp. 44–50.
[91] Besson, R. J., et al., “A Dual-Mode Thickness Shear Quartz Pressure Sensor,” IEEE Trans.
Ultrasonics, Ferroelectrics and Frequency Control, Vol. 40, No. 5, September 1993,
pp. 584–591.
[92] Wagner, H.-J., W. Hartig, and S. Büttgenbach, “Design and Fabrication of Resonating
AT-Quartz Diaphragms as Pressure Sensors,” Sensors and Actuators, Vol. 41–42, 1994,
pp. 389–393.
[93] Yamada, A., et al., “Relationship Between Sensitivity and Waveguide Position on Dia-
phragm for Silicon Based Integrated Optic Pressure Sensor,” IEEE Tech Digest 4th Pacific
Rim Conf. on Lasers and Electro Optics, Chiba, Japan, July 15–19, 2001, Vol. 1,
pp. 1-420–1-421.
[94] Fischer, K., et al., “Elasto-optical Properties of SiON Layers in an Integrated Optical Inter-
ferometer Used as a Pressure Sensor,” IEEE J. Lightwave Tech., Vol. 12, No. 1, 1994,
pp. 163–169.
[95] Benaissa, K., and A. Nathan, “IC Compatible Optomechancial Pressure Sensors Using
Mach-Zehnder Interferometry,” IEEE Trans. Electron Devices, Vol. 43, No. 9, September
1996, pp. 1571–1582.
[96] Kim, Y., and D. P. Neikirk, “Micromachined Fabry-Pérot Cavity Pressure Transducer,”
IEEE Photonics Technol. Lett., Vol. 7, No. 12, December 1995, pp. 1471–1473.
[97] Abeysinghe, D. C., et al., “Novel MEMS Pressure and Temperature Sensor Fabricated on
Optical Fibers,” J. Micromech. Micromeng., Vol. 12, 2002, pp. 229–235.
[98] Reindl, L., et al., “A Wireless AQP Pressure Sensor Using Chirped SAW Delay Line Struc-
tures,” Proc. IEEE 1998 Ultrasonics Symp., Sendai, Japan, October 5–8, 1998, Vol. 1,
pp. 355–358.