Page 158 - MEMS Mechanical Sensors

6.7 Conclusions 147

[37] Kroetz, G. H., M. H. Eickhoff, and H. Moeller, “Silicon Compatible Materials for Harsh
Environment Sensors,” Sensors and Actuators, Vol. A74, 1999, pp. 182–189.
[38] Okojie, R. S., A. A. Ned, and A. D. Kurtz, “Operation of a (6H)-SiC Pressure Sensor at
500C,” Sensors and Actuators, Vol. A66, 1998, pp. 200–204.
[39] Ned, A. A., R. S. Okojie, and A. D. Kurtz, “6H-SiC Pressure Sensor Operation at 600°C,”
IEEE 4th Int. High Temperature Electronics Conference (HITEC), June 14–18, 1998,
Albuquerque, NM, pp. 257–260.
[40] Ned, A. A., et al., “Dynamic Pressure Measurements Using Silicon Carbide Transducers,”
19th IEEE Int. Congress on Instrumentation in Aerospace Simulation Facilities, August
27–30, 2001, Cleveland, OH, pp. 240–245.
[41] Folkmer, B., P. Steiner, and W. Lang, “A Pressure Sensor Based on a Nitride Membrane
Using Single-Crystalline Piezoresistors,” Sensors and Actuators, Vol. A54, 1996, pp.
488–492.
[42] Lin, L., and W. Yun, “Design, Optimization and Fabrication of Surface Micromachined
Pressure Sensors,” Mechatronics, Vol. 8, 1998, pp. 505–519.
[43] Guckel, H., “Silicon Microsensors: Construction, Design and Performance,” Microlec-
tronic Engineering, Vol. 15, 1991, pp. 387–398.
[44] Sugiyama, S., et al., “Micro-Diaphragm Pressure Sensor,” Proc. IEEE IEDM, Los Angeles,
CA, 1986, pp. 184–187.
[45] Kälvesten, E., et al., “The First Micromachined Pressure Sensor for Cardio Vascular
Pressure Measurement,” Proc. 11th IEEE Int. Workshop on MEMS, June 25–29, 1998,
Heidelberg, Germany, pp. 574–579.
[46] Lisec, T., M. Kreutzer, and B. Wagner, “Surface Micromachined Piezoresistive Sensors
with Step-Type Bent and Flat Membrane Structures,” IEEE Trans. Electron Devices, Vol.
43, No. 9, September 1996, pp. 1457–1552.
[47] Melvas, P., E. Kälvesten, and G. Stemme, “A Temperature Compensated Dual Beam
u
Pressure Sensor,” Sensors and Actuators, Vol. A100, 2002, pp. 46–53.
[48] Sander, C. S., J. W. Knutti, and J. D. Meindl, “A Monolithic Capacitive Pressure Sensor
with Pulsed Period Output,” IEEE Trans. Electron Devices, Vol. ED-17, May 1980, pp.
927–930.
[49] Lee, Y. S., and K. D. Wise, “A Batch Fabricated Silicon Capacitive Pressure Transducer
with Low Temperature Sensitivity,” IEEE Trans. Electron Devices, Vol. ED-29, No. 1,
January 1982, pp. 42–48.
[50] Pons, P., and G. Blasquez, “Low-Cost High Sensitivity Integrated Pressure and Tempera-
ture Sensor,” Sensors and Actuators, Vol. A41–42, 1994, pp. 398–401.
[51] Rogers, T., and J. Kowal, “Selection of Glass, Anodic Bonding Conditions and Material
Compatibility for Silicon-Glass Capacitive Sensors,” Sensors and Actuators, Vol. 46–47,
1995, pp. 113–120.
[52] Rudolf, F., and H. de Lambilly, “Low Cost Pressure Sensor Microsystems,” Proc. 4th Int.
Conf. on Micro Opto Mechanical Systems, Berlin, Germany, October 19–21, 1994,
pp. 703–711.
[53] Goustouridis, D., et al., “A Miniature Self-Aligned Pressure Sensing Element,” J. Micro-
mech. Microeng., Vol. 6, 1996, pp. 33–35.
[54] Hanneborg, A., et al., “A New Integrated Capacitive Pressure Sensor with Frequency
Modulated Output,” IEEE Digest 1985 Int. Conf. on Solid State Sensors and Actuators
(Transducers ’85), June 11–14, 1985, Philadelphia, PA, pp. 186–188.
[55] Catling, D. C., “High-Sensitivity Silicon Capacitive Sensors for Measuring Medium-
Vacuum Gas Pressures,” Sensors and Actuators, Vol. A64, 1998, pp. 157–164.
[56] Mulkins, D. F., and Pogany, K., “Quartz Capacitive Pressure Sensor: Product Applications
and Technical Description,” Sensors Expo West Proceedings, 1989, pp. 206A/1–206A/12.
[57] Zhang, Y., and K. D. Wise, “An Ultra Sensitive Capacitive Pressure Sensor with Bossed
Dielectric Diaphragm,” Technical Digest, 1994 Solid-State Sensor and Actuator Work-
shop, Hilton Head, SC, 1994, pp. 205–208.