Page 265 - MEMS Mechanical Sensors

254 Flow Sensors

[75] http://www.isit.fraunhofer.com.
[76] Billat, S., et al., “Micromachined Inclinometer with High Sensitivity and Very Good Stabil-
ity,” Proc. Transducers, Munich, Germany, Vol. 2, 2001, pp. 1488–1491.
[77] http://www.leister.com.
[78] http://www.sls-micro-technology.com.
[79] http://www.gesim.de.
[80] http://www.mierijmeteo.demon.nl.
[81] Cho, S. T., and K. D. Wise, “A High-Performance Microflowmeter with Built-In Self Test,”
Proc. Transducers, San Francisco, CA, 1991, pp. 400–403.
[82] Oosterbroek, R. E., et al., “Designing, Realization and Characterization of a Novel Capaci-
tive Pressure/Flow Sensor,” Proc. Transducers, Chicago, IL, 1997, pp. 151–154.
[83] Oosterbroek, R. E., et al., “A Micromachined Pressure/Flow Sensor,” Sensors and Actua-
tors, Vol. A77, 1999, pp. 167–177.
[84] Richter, M., et al., “A Novel Flow Sensor with High Time Resolution Based on Differential
Pressure Principle,” Proc. International Conference on Micro Electro Mechanical Systems
(MEMS), Orlando, FL, 1999, pp. 118–123.
[85] Nishimoto, T., S. Shoji, and M. Esashi, “Buried Piezoresistive Sensor by Means of MeV Ion
Implantation,” Sensors and Actuators, Vol. A43, 1994, pp. 249–253.
[86] Kuoni, A., et al., “Polyimide Membrane with ZnO Piezoelectric Thin Film Pressure Trans-
ducers as a Differential Pressure Liquid Flow Sensor,” Journal of Micromechanics and
Microengineering, Vol. 13, 2003, pp. S103–107.
[87] Berberig, O., et al., “The Prantl Micro Flow Sensor (PMFS): A Novel Silicon Diaphragm
Capacitive Sensor for Flow-Velocity Measurement,” Sensors and Actuators, Vol. 66, 1998,
pp. 93–98.
[88] Gass, V., B. H. van der Schoot, and N. F. de Rooij, “Nanofluid Handling by Microflow Sen-
sor Based on Drag Force Measurement,” Proc. IEEE Micro Electro Mechanical Systems,
Fort Lauderdale, FL, 1993, pp. 167–172.
[89] Zhang, L., et al., “A Micromachined Single-Crystal Silicon Flow Sensor with a Cantilever
Paddle,” Proc. IEEE International Symposium on Micromechatronics and Human Science,
Nagoya, Japan, 1997, pp. 225–229.
[90] Su, Y., A. G. R. Evans, and A. Brunnschweiler, “Micromachined Silicon Cantilever Paddles
with Piezoresistive Read-out for Flow Sensing,” Journal of Micromechanics and Microengi-
neering, Vol. 6, 1996, pp. 69–72.
[91] Ozaki, Y., et al., “An Air Flow Sensor Modeled on Wind Receptor Hairs of Insects,” Proc.
of the 13th IEEE International Conference on Micro Electro Mechanical Systems (MEMS),
Miyazaki, Japan, 2000, pp. 531–536.
[92] Fan, Z., et al., “Design and Fabrication of Artificial Lateral Line Flow Sensors,” Journal of
Micromechanics and Microengineering, Vol. 12, 2002, pp. 655–661.
[93] Fan, Z., et al., “Development of Artificial Lateral-Line Flow Sensors,” Proc. Solid-State Sen-
sor, Actuator and Microsystems Workshop, Hilton Head, SC, 2002, pp. 169–172.
[94] Svedin, N., et al., “A Lift-Force Flow Sensor Designed for Acceleration Insensitivity,” Sen-
sors and Actuators, Vol. A68, 1998, pp. 263–268.
[95] Svedin, N., et al., “A New Silicon Gas-Flow Sensor Based on Lift Force,” Journal of Microe-
lectromechanical Systems, Vol. 7, No. 3, 1998, pp. 303–308.
[96] Enoksson, P., G. Stemme, and E. Stemme, “A Silicon Resonant Sensor Structure for Coriolis
Mass-Flow Measurements,” Journal of Microelectromechanical Systems, Vol. 6, No. 2,
1997, pp. 119–125.
[97] Sparks, D., et al., “In-Line Chemical Concentration Sensor,” Proc. Sensor Expo and Con-
ference, Chicago, IL, 2003.
[98] Svedin, N., E. Stemme, G. Stemme, “A Static Turbine Flow Meter with a Micromachined
Silicon Torque Sensor,” Proc. International Conference on Micro Electro Mechanical Sys-
tems (MEMS), Interlaken, Switzerland, 2001, pp. 208–211.