Page 267 - MEMS Mechanical Sensors
P. 267
256 Flow Sensors
[119] Schmidt, M., et al., “Design and Calibration of a Microfabricated Floating-Element Shear-
Stress Sensor,” IEEE Trans. Electron Devices, Vol. 35, 1988, pp. 750–757.
[120] Ng, K., K. Shajii, and M. Schmidt, “A Liquid Shear-Stress Sensor Fabricated Using Wafer
Bonding Technology,” Proc. Transducers, San Francisco, CA, 1991, pp. 931–934.
[121] Padmanabhan, A., et al., “A Silicon Micromachined Floating-Element Shear-Stress Sensor
with Optical Position Sensing by Photodiodes,” Proc. Transducers, Stockholm, Sweden,
Vol. 2, 1995, pp. 436–439.
[122] Pan, T., et al., “Calibration of Microfabricated Shear Stress Sensors,” Proc. Transducers,
Stockholm, Sweden, Vol. 2, 1995, pp. 443–446.
[123] Oudheusen, B., and J. Huijsing, “Integrated Flow Friction Sensor,” Sensors and Actuators,
Vol. A15, 1988, pp. 135–144.
[124] von Papen, T., et al., “A MEMS Surface Fence Sensor for Wall Shear Stress Measurement in
Turbulent Flow Areas,” Proc. Transducers, Munich, Germany, Vol. 2, 2001, pp.
1476–1479.
[125] Dao, D. V., et al., “Micro Force-Moment Sensor with Six-Degree of Freedom,” Proc. Inter-
national Symposium on Micromechatronics and Human Science, Nagoya, Japan, 2001, pp.
93–98.
[126] Baltes, H., O. Paul, and O. Brand, “Micromachined Thermally Based CMOS Microsen-
sors,” Proc. of IEEE, Vol. 86, No. 8, 1998, pp. 1660–1678.
[127] Hauptmann, P., N. Hoppe, and A. Püttmer, “Application of Ultrasonic Sensors in the Proc-
ess Industry,” Review Article, Measurement Science and Technology, Vol. 13, 2002, pp.
R73–R83.
[128] Hashimoto, K., T. Ienaka, and M. Yamaguchi, “Miniaturized Ultrasonic-Wave Velocity
and Attenuation Sensors for Liquid,” Proc. Transducers, Yokohama, Japan, 1993, pp.
700–704.
[129] Costello, B. J., S. W. Wenzel, and R. M. White, “Density and Viscosity Sensing with Ultra-
sonic Flexural Plate Waves,” Proc. Transducers, Yokohama, Japan, 1993, pp. 704–707.
[130] Rajendran, V., et al., “Mass Density Sensor for Liquids Using ZnO-Film/Al-Foil Lamb
Wave Device,” Proc. Transducers, Yokohama, Japan, 1993, pp. 708–711.
[131] Yu, D., H. Y. Hsieh, and J. N. Zemel, “Microchannel Pyroelectric Anemometer,” Sensors
and Actuators, Vol. A39, 1993, pp. 29–35.
[132] Bouwstra, S., P. Kemna, and R. Legtenberg, “Thermally Excited Resonating Membrane
Mass Flow Sensor,” Sensors and Actuators, Vol. A20, 1989, pp. 213–223.
[133] Joshi, S. G., “Flow Sensors Based on Surface Acoustic Waves,” Sensors and Actuators, Vol.
44, 1994, pp. 191–197.
[134] Xu, Y., et al., “Flexible Shear-Stress Skin and Its Application to Unmanned Aerial Vehi-
cles,” Sensors and Actuators, Vol. 105, 2003, pp. 321–329.
[135] Lerch, P., O. Dubochet, and P. Renaud, “From Simple Devices to Promising Microsystems
Applications,” Proc. International Conference on Microelectronics, Nis, Yugoslavia, Vol.
1, 1997, pp. 59–62.