Page 336 -

LIGA and Micromolding 4-77

Lee, L.J., Shih, C.-H., Juang, Y.-J., Garcia, J., Madou, M.J., and Koelling, K.W. (1999) “Macro- and Micro-
Molding of Polymeric Materials,” in Novel Microfabrication Options for BioMEMS Conference
(Workshop), The Knowledge Foundation, San Francisco.
Lehr, H., and Schmidt, M. (1995) “The LIGA Technique,” commercial brochure, IMM Institut fur
Mikrotechnnik, GmbH, Mainz-Hechtsheim.
Leyendecker, K., Bacher, W., Stark, W., and Thommes, A. (1994) “New Microelectrodes for the
Investigation of the Electroforming of LIGA Microstructures,” Electrochim. Acta 39, pp. 1139–43.
Lin, L.-W., Chiu, C.-J., Bacher, W., and Heckele, M. (1996) “Microfabrication Using Silicon Mold Inserts
and Hot Embossing,” in Seventh International Symposium on Micro Machine and Human Science,
October 2 to 4, pp. 67–71, Nagoya, Japan.
Lingnau, J., Dammel, R., and Theis, J. (1989) “Recent Trends in X-ray Resists: Part I,” Solid State Technol.
32, pp. 105–12.
Lubitz, K. (1989) “Mikrostrukturierung von Piezokeramik,” VDI-Tagungsbericht 796, pp. 35–49.
Madou, M.J. (2002) Fundamentals of Microfabrication, 2nd ed., CRC Press, Boca Raton.
Madou, M.J., Lu, Y., Lai, S., Juang, Y.-J., Lee, L.J., and Daunert, S. (2000) “A Novel Design on a CD Disc
for 2-Point Calibration Measurement,” in Proceedings: Solid-State Sensor and Actuator Workshop,
June 4–8, pp. 191–94, Hilton Head Island, SC.
Madou, M.J., and Morrison, S.R. (1989) Chemical Sensing with Solid State Devices, Academic Press,
New York.
Madou, M.J., and Morrison, S.R. (1991) “High-Field Operation of Submicrometer Devices at
Atmospheric Pressure,” in 6th International Conference on Solid-State Sensors and Actuators
(Transducers ’91), June 24–27, pp. 145–49, San Francisco.
Madou, M.J., and Murphy, M. (1995) A Method for PMMA Stress Evaluation, unpublished results.
Malek, C.K., Vladimirsky, Y., Vladimirsky, O., Scott, J., Craft, B., and Saile, V. (1996) “X-ray
Microfabrication Activities at the Center for Advanced Microstructures and Devices (CAMD),”
Rev. Sci. Instrum. 67, pp. 1–6, 1996.
Mallory, G.O., and Hadju, J.B. (1990) Electroless Plating: Fundamentals and Applications, American
Electroplaters and Surface Finishers Society (AESF), Orlando.
Maner, A., Harsch, S., and Ehrfeldg, W. (1987) “Mass Production of Microstructures with Extreme Aspect
Ratios by Electroforming,” in Proceedings: 74th AESF Annual Technical Conference (SUR/FIN ’87),
July, pp. 60–65, Chicago.
Maner, A., Harsch, S., and Ehrfeldg, W. (1988) “Mass Production of Microdevices with Extreme Aspect
Ratios by Electroforming,” Plat. Surf. Finish. 75, pp. 60–65.
Masuko, N., Osaka, T., and Ito, Y., eds. (1996) Electrochemical Technology: Innovation and New
Developments, copublished by Kodansha and Gordon and Breach Science Publishers, Japan and the
Netherlands.
Menz, W., and Bley, P. (1993) Mikrosystemtechnik für Ingenieure, VCH Publishers, Weinheim, Germany.
Michel, A., Ruprecht, R., and Bacher, W. (1993) “Abformung von Mikrostrukturen auf Prozessierten
Wafern,” KfK, Report No. 5171, Karlsruhe, Germany.
Mohr, J., Burbaum, C., Bley, P., Menz, W., and Wallrabe, U. (1990) “Movable Microstructures
Manufactured by the LIGA Process as Basic Elements for Microsystems,” in Microsystem
Technologies 90, pp. 529–37, Reichl, H., ed., Springer, Berlin.
Mohr, J., Ehrfeld, W., and Munchmeyer, D. (1988a) Report No. 4414.
Mohr, J., Ehrfeld, W., and Munchmeyer, D. (1988b) “Requirements on Resist Layers in Deep-Etch
Synchrotron Radiation Lithography,” J. Vac. Sci. Technol. B6, pp. 2264–67.
Mohr, J., Ehrfeld, W., Munchmeyer, D., and Stutz, A. (1989) “Resist Technology for Deep-Etch
Synchrotron Radiation Lithography,” Makromol. Chem. Macromol. Symp. 24, pp. 231–51.
Mohr, J., and Strohmann, M. (1992) “Examination of Long-Term Stability of Metallic LIGA
Microstructures by Electromagnetic Activation,” J. Micromech. Microeng. 2, pp. 193–95.
Momma, C., Nolte, S., Chichkov, N., Alvensleben, B.V., and Tunermann, F.A. (1997) “Precise Laser
Ablation with Ultrashort Pulses,” Appl. Surf. Sci. 109/110, pp. 15–19.

© 2006 by Taylor & Francis Group, LLC