Page 338 -

LIGA and Micromolding 4-79

Shew, B.-Y., Cheng, Y., Lin, C.-H., Ma, W.-P., Huang, G.-J., Kuo, C.-L., Tseng, S.-C., Lee, D.-S., and
Chang, G.-L. (1999) “Manufacturing Process for LIGA Spinnerets,” Sensor. Mater. 11,
pp. 329–37.
Shih, W.-P., Cheng, Y., Lin, C.-Y., and Hwang, G.-J. (1998) “Low-Cost X-ray Conformal Mask Using
X-ray Dry FILM Resist,” Microelectron. Eng. 40, pp. 43–50.
Siddons, D.P., and Johnson, E.D. (1994) “Precision Machining Using Hard X-rays,” Synchrotron Radiat.
News 7, pp. 16–18.
Spiller, E., Feder, R., Topalian, J., Castellani, E., Romankiw, L., and Heritage, M. (1976) “X-ray Lithography
for Bubble Devices,” Solid State Technol., April pp. 62–68.
Tabata, O., You, H., Shiraishi, H., Nakanishi, H., Nishimoto, T., Yamamoto, K., and Baba, Y. (2000) “µ-CE
Chip Fabricated by Moving Mask Deep R-Ray Lithography Technology,” in Micro Total Analysis
Systems 2000: Proceedings of the µTAS 2000 Symposium, pp. 143–46, Kluwer Academic, Enschede,
Netherlands.
Thomes, A., Stark, W., Goller, H., and Liebscher, H. (1992) “Erste Ergebnisse zur Galvanoformung von
LIGA Mikrostrukturen aus Eisen-Nickel Legierungen,” in Symp. Mikroelektrochemie:
Friedrichsroda.
Urisu, T., and Kyuragi, H. (1987) “Synchrotron Radiation-Excited Chemical-Vapor Deposition and
Etching,” J. Vac. Sci. Technol. B5, pp. 1436–40.
Vladimirsky, O. (1995) “Spin Coating PMMA,” private communication in May, Louisiana State
University.
Vladimirsky, Y., Vladimirsky, O., Saile, V., Morris, K., and Klopf, J.M. (1995) “Transfer Mask for High
Aspect Ratio Micro-Lithography,”in Microlithography ’95 (Proceedings of the SPIE), 2437, pp. 391–96,
Santa Clara, CA.
Waldo, W.G., and Yanof, A.W. (1991) “0.25 Micron Imaging by SOR X-ray Lithography,” Solid State
Technol. 34, pp. 29–31.
Wallrabe, U., Bley, P., Krevet, B., Menz, W., and Mohr, J. (1994) “Design Rules and Test of Electrostatic
Micromotors Made by the LIGA Process,” J. Micromech. Microeng. 4, pp. 40–45.
Warrington, R.O. (1999) “An Overview of Micromechanical Machining Processes for BioMEMS,” in
Novel Microfabrication Options for BioMEMS Conference (Proceedings), The Knowledge
Foundation, San Francisco.
Weber, L., Ehrfeld, W., Freimuth, H., Lacher, M., Lehr, H., and Pech, B. (1996) “Micro-Molding: A
Powerful Tool for the Large Scale Production of Precise Microstructures,” in SPIE: Micromachining
and Microfabrication Process Technology II, Austin, pp. 156–67.
Wimberger-Friedl, R. (1999) “Injection Molding of Sub-µm Grating Optical Elements,” in Proc. SPE
ANTEC, pp. 476–80.
Wollersheim, O., Zumaque, H., Hormes, J., Hoessel, J.L., Haussling, L., and Hoffman, G. (1994)
“Radiation Chemistry of Poly(lactides) as New Polymer Resists for the LIGA Process,”
J. Micromech. Microeng. 4, pp. 84–93.
Yu, L., Juang, Y.-J., Koelling, K.W., and Lee, L.J. (2000) “Thin Wall Injection Molding of Thermoplastic
Microstructures,” in Proceedings: SPE ANTEC, Orlando, pp. 468–73.

© 2006 by Taylor & Francis Group, LLC