Page 725 - Mechanical Engineers' Handbook (Volume 2)

716 General-Purpose Control Devices

REFERENCES
1. http://www.iec.ch.
2. IEC 60848, GRAFCET Specification Language for Sequential Function Charts, 2nd ed., International
Electrotechnical Commission, Geneva, 2002.
3. IEC 61131-3, Programmable Controllers—Part 3: Programming Languages, 2nd ed., International
Electrotechnical Commission, Geneva, 2003.
4. IEC 61512-1, Batch Control—Part 1: Models and Terminology, 1st ed., International Electrotechnical
Commission, Geneva, 1997.
5. IEC 61499-1, Function Blocks for Industrial-Process Measurement and Control Systems—Part 1:
Architecture, 1st ed., International Electrotechnical Commission, Geneva, 2004.
6. B. P. Douglass, Real-Time UML, Addison-Wesley, Reading MA, 1998.
7. IEC 61131-1, Programmable Controllers—Part 1: General Information, 2nd ed., International Elec-
trotechnical Commission, Geneva, 2003.
8. IEC 61131-2, Programmable Controllers—Part 2: Equipment Requirements and Tests, 2nd ed., In-
ternational Electrotechnical Commission, Geneva, 2004.
9. IEC 61131-4, Programmable Controllers—Part 4: User Guidelines, 2nd ed., International Electro-
technical Commission, Geneva, 2004.
10. IEC 61131-5, Programmable Controllers—Part 5: Communications, 1st ed., International Electro-
technical Commission, Geneva, 2000.
11. IEC 61131-7, Programmable Controllers—Part 7: Fuzzy Control Programming, 1st ed., International
Electrotechnical Commission, Geneva, 2000.
12. IEC 61131-8, Programmable Controllers—Part 8: Guidelines for the Application and Implementa-
tion of Programming Languages, 2nd ed., International Electrotechnical Commission, Geneva, 2003.
13. R. S. Pressman and J. E. Williams, Numerical Control and Computer-Aided Manufacturing, Wiley,
New York, 1977.
14. W. Leslie, Numerical Control Users Handbook, McGraw-Hill, New York, 1970.
15. Y. Koren, Computer Control of Manufacturing Systems, McGraw-Hill, New York, 1983.
16. E. M. Trent, Metal Cutting, Butterworths, Woburn, MA, 1977.
17. G. Boothroyd, C. Poli, and L. E. Murch, Automatic Assembly, Marcel Dekker, New York, 1982.
18. A. Fitzgerald and C. Kingsley, Electric Machinery, 2nd ed., McGraw-Hill, New York, 1958.
19. J. Childs, Numerical Control Part Programming, Industrial Press, New York, 1973.
20. M. Groover, and E. Zimmers, CAD/CAM Computer-Aided Design and Manufacturing, Prentice-
Hall, Englewood Cliffs, NJ, 1984.
21. Y. Koren, A. Shani, and J. Ben-Uri, ‘‘Interpolator for a CNC System,’’ IEEE Transactions on Com-
puters, C-25(1), 32–37 (1976).
22. General Electric, Pulse Width Modulated Servo Drive, GEK-36203, March 1973.
23. J. Beckett and G. Mergler, ‘‘Analysis of an Incremental Digital Positioning Servosystem with Digital
Rate Feedback,’’ ASME Journal of Dynamic Systems, Measurement and Control, 87, March 1965.
24. A. Roberts and R. Prentice, Programming for Numerical Control Machines, 2nd ed., McGraw-Hill,
New York, 1978.
25. Illinois Institute of Technology Research Institute (IITRI), APT Part Programming, McGraw-Hill,
New York, 1967.
26. D. Grossman, ‘‘Opportunities for Research on Numerical Control Machining,’’ Communications of
the ACM 29(6), 515–522 (1986).

BIBLIOGRAPHY
Hughes, T. A., Programmable Controllers, 4th ed., ISA, Raleigh, NC, 2004.
Lewis, R., Modelling Distributed Control Systems Using IEC 61499, IEE, London, 2001.
Lewis, R. W., Programming Industrial Control Systems Using IEC 1131-3, rev. ed., IEE, London, 1998.