Page 140 - MODELING OF ASPHALT CONCRETE

118 Cha pte r F o u r

Appliquées De Lyon, Laboratoire Géomatériaux du Département de Génie Civil,
Lyon.
Di Benedetto, H., Partl, M., and de la Roche, C. (2001). “Stiffness Testing for Bituminous
Mixtures.” RILEM TC 182-PEB Performance Testing and Evaluation of Bituminous
Materials. Materials and Structure, Vol. 34 (236), March, 2001, pp. 65–70.
Francken, L., and Verstraeten, J. (1998). “Interlaboratory Test Program on Complex
Modulus and Fatigue.” RILEM Report 17, Bituminous Binders and Mixes, Edited by L.
Francken, 182–215 London.
Fonseca, O. A., and Witczak, M. W. (1996). “A Prediction Methodology for the Dynamic
Modulus of In-Placed Aged Asphalt Mixtures.” Journal of the Association of Asphalt
Paving Technologists, Vol. 65, 532–572.
Gordon, G. V., and Shaw, M. T. (1994). Computer Programs for Rheologists. Hanser/Gardner
Publishers, New York.
Harrigan, E. T., Leahy, R. B., and Youtcheff, J. S. (1994). The Superpave Mix Design
Manual Specifications, Test Methods, and Practices, SHRP-A-379. Strategic Highway
Research Program. National Research Council. Washington, D.C.: National Academy
of Science.
Hewlett-Packard Co. (1989). The Fundamentals of Signal Analysis. Application Note 243.
Hewlett-Packard Co. Printed in USA, 5952-8898.
Huang, Y. (1993). Pavement Analysis and Design. Appendix A, Theory of Visco-elasticity.
Prentice Hall, Englewood Cliffs, N.J.
Kendall, M. G. (1951). The Advanced Theory of Statistics. Vol. II, Hafner, New York,
p. 377.
NCHRP 1-37A Draft Document. (2002). 2002 Guide for the Design of New and Rehabilitated
Pavement Structures. ERES Division of ARA Inc., Champaign, Ill.
Mirza, M. W., and Witczak, M. W. (1994). Bituminous Mix Dynamic Material Characterization
Data Acquisition and Analysis Programs Using 458.20 MTS Controller. University of
Maryland, Department of Civil and Environmental Engineering, College Park,
Md.
Neifar, M., Di Benedetto, H., and Dogmo, B. (2003). Permanent Deformation and Complex
Modulus: Two Different Characteristics from a Unique Test. Proceedings in the 6th
International RILEM Symposium, April 14–17, 2003, Zurich, Switzerland, 316–323.
Partl, M. N., and Francken, L. (1998). “Introduction.” RILEM Report 17, Bituminous Binders
and Mixes. edited by L. Francken, 2–10 London.
Pellinen, T. (2001). Investigation of the Use of Dynamic Modulus as an Indicator of Hot-
Mix Asphalt Performance. A Dissertation Presented in Partial Fulfillment of the
Requirements of the Degree of Doctor of Philosophy. Submitted to the Faculty of
Graduate School of the Arizona Sate University, Tempe, Ariz.
Pellinen, T., and Crockford, B. (2003). “Comparison of Analysis Techniques to Obtain
Modulus and Phase Angle from Sinusoidal Test Data.” Proceedings in the 6th
International RILEM Symposium, April 14–17, Zurich, 2003, Switzerland, 307–309.
Pellinen, T., and Witczak, M. W. (1998). Assessment of the Relationship Between Advanced
Material Characterization Parameters and the Volumetric Properties of A MDOT Superpave
Mix. Submitted to Maryland Department of Transportation State Highway
Administration. Department of Civil Engineering, University of Maryland of College
Park, Md.
Pellinen, T, K., and Witczak, M. W. (2002a). “Use of Stiffness of Hot-Mix Asphalt as a
Simple Performance Test.” Journal of Transportation Research Records, No 1789, 80–90.