Page 141 - MODELING OF ASPHALT CONCRETE

Complex Modulus Characterization of Asphalt Concr ete 119

Pellinen, T. K., and Witczak, M. W. (2002b). “Stress Dependent Mastercurve Construction
for Dynamic (Complex) Modulus.” Journal of the Association of Asphalt Paving
Technologists, Vol. 71, 281–309.
Pellinen, T., Witczak M. W., and Bonaqusit, R. (2002). “Master Curve Construction Using
Sigmoidal Fitting Function with Non-linear Least Squares Optimization Technique.”
Proceedings of the 15th ASCE Engineering Mechanics Division Conference, Columbia
University, June 2–5, 2002, New York.
Ramsey, K. A. (1975). “Effective Measurements for Structural Dynamics Testing.” Sound
and Vibrations, November 1975, 24–35.
Rogue, R., and Buttlar, W. G. (1992). “The Measurement and Analysis System to Accurately
Determine Asphalt Concrete Properties Using the Indirect Tensile Mode.” Journal of
the Association of Asphalt Paving Technologists, Vol. 61, 304–328.
Rowe G. M., and Sharrock, M. J. (2000). “Development of Standard Techniques for the
Calculation of Master Curves for Linear-Visco Elastic Materials.” The 1st International
Symposium on Binder Rheology and Pavement Performance. The University of Calgary,
August 14–15, 2000, Alberta, Canada.
Saarela, A., (1993). Asfalttipäällysteiden tutkimusohjelma ASTO 1987-1992 (Asphalt
Pavements Research Program ASTO 1987-1992), Loppuraportti. Technical Research
Centre of Finland. Road, Traffic and Geotechnical Laboratory. Espoo.
Schapery, R. (1969). “On the Characterization of Non-linear Visco-elastic Materials.”
Polymer Engineering and Science, Vol. 9, 295–310.
Witczak, M. W., and Kaloush, K. (1998). Performance evaluation of Asphalt Modified Mixtures
Using Superpave and P-401 Mix Grading. Submitted to: Maryland Department of
Transportation, Maryland Port Administration. Department of Civil Engineering,
University of Maryland of College Park, Md.
Witczak, M. W., and Uzan, J. (1988). The Universal Airport Pavement Design System—
Report I of IV: Granular Material Characterization. Department of Civil Engineering,
University of Maryland of College Park, Md.
Witczak, M. W., Bonaquist, R., Von Quintus, H., and Kaloush, K. (2000). “Specimen
Geometry and Aggregate Size Effects in Uniaxial Compression and Constant Height
Shear Test.” Journal of the Association of Asphalt Paving Technologists, Vol. 69, 733–793.
Witczak, M. W., Hafez, I., Ayres, H., and Kaloush, K. (1996). Comparative Study of MSHA
Asphalt Mixtures Using Advanced Dynamic Material Characterization Tests. Submitted to:
Maryland Department of Transportation, Maryland Port Administration, Department
of Civil Engineering, University of Maryland of College Park, Md.