Page 41 - Power Quality in Electrical Systems

24 Chapter Two

References

[2.1] IEEE, “IEEE Recommended Practices and Requirements for Harmonic Control in
Electrical Power Systems,” IEEE Std. 519-1992, revision of IEEE Std. 519-1981.
[2.2] ____, “IEEE Recommended Practice for Monitoring Electric Power Quality,” IEEE
Std. 1159-1995.
[2.3] American National Standards Institute, “American National Standard Voltage
Ratings (60Hz) for Electric Power Systems and Equipment,” ANSI Std. C84.1-1989.
[2.4] IEEE, “IEEE Guide for Service to Equipment Sensitive to Momentary Voltage
Disturbances,” IEEE Std. 1250–1995.
[2.5] G. Lee, M. Albu, and G. Heydt, “A Power Quality Index Based on Equipment
Sensitivity, Cost, and Network Vulnerability,” IEEE Transactions on Power Delivery,
vol 19, no 3, July 2004, pp. 1504–1510.
[2.6] IEEE, “IEEE Recommended Practice for Evaluating Electric Power System
Compatibility with Electronic Process Equipment,” IEEE Std. 1346-1998.
[2.7] ITIC curve is published by the Information Technology Industry Council, 1250 Eye
St. NW, Suite 200, Washington D.C., 20005, or available on the Web at
www.itic.com.
[2.8] S. Djokic, G. Vanalme, J. V. Milanovic, and K. Stockman, “Sensitivity of Personal
Computers to Voltage Sags and Short Interruptions,” IEEE Transactions on Power
Delivery, vol. 20, no. 1, January 2005, pp. 375–383.
[2.9] Power Integrations, Inc., “Techniques for EMI and Safety,” Application Note AN-15,
June 1996; available from the Web: www.powerint.com.
[2.10] Code of Federal Regulations, Title 47, Part 15, Subpart J, “Computing Devices”.
[2.11] CISPR, Publication 22, “Limits and Methods of Measurements of Radio Interference
Characteristics of Information Technology Equipment,” 1985.
[2.12] European Standard EN55022, “Limits and Methods of Measurement of Radio
Interference Characteristics of Information Technology Equipment,” CENELEC,
1994.
[2.13] R. Calcavecchio, “Development of CISPR 22 and Second Edition,” IEE Colloquium
on Development of EMC Standards for Information Technology Equipment, March 25,
1992, pp. 2/1–2/8.
[2.14] T. Curatolo and S. Cogger, “Enhancing a Power Supply to Ensure EMI Compliance,”
EDN, February 17, 2005, pp. 67–74.
[2.15] V. K. Dhar, “Conducted EMI Analysis—A Case Study,” Proceedings of the
International Conference on Electromagnetic Interference and Compatibility ‘99,
December 6–8, 1999, pp. 181–186.