Page 128 - Rashid, Power Electronics Handbook

7 Insulated Gate Bipolar Transistor 115

Because of their simple gate drives and modular packaging, References
IGBTs led to simpler construction of power electronic circuits.
This feature has lead to a trend to standardize and modularize 1. Adler, M. S., Owyang, K. W., Baliga, B. J., and Kokosa, R. A., ‘‘The
power electronic circuits. Simpli®cation of the overall system evolution of power device technology,'' IEEE Trans. Electron. Devices
ED-31: 1570–1591 (1984).
design and construction and signi®cant cost reduction are the
2. Akagi, H., ‘‘The state-of-the-art of power electronics in Japan,'' IEEE
main implications of this approach. With these goals the
Trans. Power Electron. 13: 345–356 (1998).
Power Electronics Building Block (PEBB) program has been
3. Baliga, B. J., Adler, M. S., Love, R. P., Gray, P. V., and Zommer, N.,
introduced, where the entire power electronic converter system ‘‘The insulated gate transistor: a new three-terminal MOS controlled
is reduced to a single block. Similar modular power electronic bipolar power device,'' IEEE Trans. Electron. Devices ED-31: 821–828
blocks are commercially available at low power levels in the (1984).
form of power-integrated circuits. At higher power levels, 4. Baliga B. J., Power Semiconductor Devices, PWS Publishing, Boston,
these blocks have been realized in the form of intelligent 1996.
power modules and power blocks. However, these high- 5. Blaabjerg, F. and Pedersen, J. K., ‘‘An optimum drive and clamp
power modules do not encompass entire power electronic circuit design with controlled switching for a snubberless PWM-VSI-
systems such as motor drives and UPS. The aim of the PEBB IGBT inverterleg,'' in IEEE Power Electronics Specialists Conference
program is to realize the whole power-handling system within Records, pp. 289–297, 1992.
6. Chokhawala, R. and Castino, G., ‘‘IGBT fault current limiting
standardized blocks. A PEBB is a universal power processor
circuits,'' in IEEE Industry Applications Society Annual Meeting
that changes any electrical power input to any desired form of
Records, pp. 1339–1345, 1993.
voltage, current and frequency output. A PEBB is a single 7. Clemente, S. et al., IGBT Characteristics, IR Applications Note AN-
package with a multifunction controller that replaces the 983A.
complex power electronic circuits with a single device and 8. Divan, D. M. and Skibinski, G., ‘‘Zero-switching-loss inverters for
therefore reduces the development and design costs of the high power applications,'' IEEE Trans. Industry Applications 25: 634–
complex power circuits and simpli®es the development and 643 (1989).
design of large electric power systems. 9. Elasser, A., Parthasarathy, V., and Torrey, D., ‘‘A study of the internal
The applications of power electronics are varied and various device dynamics of punch-through and non punch-through IGBTs
applications have their own speci®c design requirement. There under zero-current switching,'' IEEE Trans. Power Electron. 12: 21–35
(1997).
is a wide choice of available power devices. Because of physical,
10. Ghandi, S. K., Semiconductor Power Devices, John Wiley & Sons, NY,
material and design limitations none of the currently available
1977.
devices behave as an ideal switch, which should block arbi-
11. Hefner, A. R., ‘‘An improved understanding for the transient opera-
trarily large forward and reverse voltages with zero current in tion of the insulated gate bipolar transistor (IGBT),'' IEEE Trans.
the off-state, conduct arbitrarily large currents with zero- Power Electron. 5: 459–468 (1990).
voltage drop in the on-state, and have negligible switching 12. Hefner, A. R. and Blackburn, D. L., ‘‘An analytical model for the
time and power loss. Therefore, power electronic circuits steady-state and transient characteristics of the power insulated gate
should be designed by considering the capabilities and limita- bipolar transistor,'' Solid-State Electron. 31: 1513–1532 (1988).
tions of available devices. Traditionally, there has been limited 13. Hefner, A. R., ‘‘An investigation of the drive circuit requirements for
interaction between device manufacturers and circuit the power insulated gate bipolar transistor (IGBT),'' IEEE Trans.
designers. Thus manufacturers have been fabricating generic Power Electron. 6: 208–219 (1991).
power semiconductor devices with inadequate consideration 14. Jahns, T.M. ‘‘Designing intelligent muscle into industrial motion
control,'' in Industrial Electronics Conference Records, 1–14, 1989.
of the speci®c applications where the devices are used. The
15. John, V., Suh, B. S., and Lipo, T. A., ‘‘Fast clamped short circuit
diverse nature of power electronics does not allow the use of
protection of IGBTs,'' in IEEE Applied Power Electronics Conference
generic power semiconductor devices in all applications as it
Records, pp. 724–730, 1998.
leads to nonoptimal systems. Therefore, the devices and 16. Kassakian, J. G., Schlecht, M. F., and Verghese, G. C., Principles of
circuits need to be optimized at the application level. Soft Power Electronics, Addison Wesley, 1991.
switching topologies offer numerous advantages over conven- 17. Kraus, R. and Hoffman, K., ‘‘An analytical model of IGBTs with low
tional hard-switching applications such as reduced switching emitter ef®ciency,'' in ISPSD'93, pp. 30–34.
stress and EMI, and higher switching speed at reduced power 18. Lee, H. G., Lee, Y. H., Suh, B. S., and Lee, J. W., ‘‘A new intelligent
loss. The IGBTs behave dissimilarly in the two circuit condi- gate control scheme to drive and protect high power IGBTs,'' in
tions. As a result devices optimized for hard-switching condi- European Power Electronics Conference Records, pp. 1.400–1.405, 1997.
19. Licitra, C., Musumeci, S., Raciti, A., Galluzzo, A. U., and Letor, R., ‘‘A
tions do not necessarily give the best possible performance
new driving circuit for IGBT devices,'' IEEE Trans. Power Electron. 10:
when used in soft-switching circuits. In order to extract
373–378 (1995).
maximum system performance, it is necessary to develop
20. McMurray, W., ‘‘Resonant snubbers with auxiliary switches,'' IEEE
IGBTs suited for speci®c applications. These optimized devices Trans. Industry Applications 29: 355–362 (1993).
need to be manufacturable and cost effective in order to be 21. Mohan, N., Undeland, T, and Robbins, W., Power Electronics Ð
commercially viable. Design, Converters and Applications, John Wiley & Sons, NY, 1996.