Page 96 - The Ultimate Palm Robot

Color profile: Generic CMYK printer profile
Composite Default screen
Bots /The Ultimate Palm Robot/ Mukhar & Johnson / 222880-6 / Chapter 4

Chapter 4 Using Palm VIIs and Handspring Visors 79

The black Molex connector will have four slots. It will also have a small ar-
rowhead imprinted on the connector. Find that arrowhead and insert the red
wire into the slot that lines up with the arrowhead. Insert the middle wire into
the slot next to the red wire. Skip the third slot and insert the final wire into the
slot on the right side of the Molex connector.
If you still have a four-wire connector, insert the wire next to the red wire
into the slot next to the red wire and insert the third wire into the third slot.
When connected correctly, each wire in the cable will be inserted in order into
the connector with no wires crossing over, as shown here:

Assembling the Visor’s Connector
The connector housing kit has two metal clips, shown next, and two black
plastic buttons. Each button has slots that slide over the metal clip. Slide each
button over one of the clips.

P:\010Comp\Bots\880-6\ch04.vp
Monday, May 12, 2003 4:03:05 PM