Page 117 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLIDWORKS® 2018 Fundamentals of Part Modeling

Display an Isometric view of the PLATE.

221) Press the space bar to display the Orientation dialog box.

222) Click Isometric view ~ . You can also access the

Isometric view tool from the Heads-up View toolbar.

223) Click the Shaded With Edges e icon.

Save the PLATE.

224) Click Save Iii.

Close the PLATE.

225) Click File, Close from the Menu bar.

, ,/

-;Q~ Display in the Shaded Isometric view before you save

and close the part. A bitmap image of the model is saved.

~ Additional details on the Hole Wizard feature are available in SOLIDWORKS

Help. Keywords: Hole Wizard, holes, simple and complex holes.

~ ~~ $ ~ >

.,;-'1., ~

( r~ ·~~I ){

~ Review the PLATE Part ~ PLATE (Default<<Default>_Dis~

~ ~ I History
The PLATE part utilized an Extruded Boss/Base feature. An

iftJ Sensors

Extruded Boss/Base feature consisted of a rectangular profile
~ IA] Annotations

sketched on the Front Plane. You added linear dimensions to [fJ Equations

o-
correspond to the overall size of the PLATE based on the : ~ Material <not specified>

GUIDE-CYLINDER assembly, Piston Plate. dJ Front Plane

[P Top Plane
The two holes utilized an Extruded Cut feature. You sketched

dJ Right Plane
two circles on the front face and added Equal and Horizontal

L Origin

relations. You utilized Geometric relations in the sketch to ..,. ~ Base-Extrude

reduce dimensions and to maintain the geometric requirements L Sketch-Base

of the part. Linear dimension defined the diameter and position ..... ~ Mounting Holes

of the circles. C_ sketch2

[E Small Edge Fillet
You created fully defined sketches in both the Extruded Base

(B Front-Back Edge Fillet

and Extruded Cut feature to prevent future rebuild problems and ..,. ~ CSK for M4 Flat Head Machi

obtain faster rebuild times. The Fillet feature inserted the edge C_ sketch3

Fillets and tangent edge Fillets to round the comers of the Base- L_ Sketch4

Extrude feature.

The Hole Wizard feature created the M4 Flat Head Countersink

on the back face of the PLATE. You renamed all features in the

PLATE FeatureManager.

PAGE 2 - 45