Page 115 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLIDWORKS® 2018 Fundamentals of Part Modeling

, ,/

-;Q~ Minimize the number of Fillet radius sizes created in the FeatureManager. Combine

Fillets and Rounds that have a common radius. Select all Fillet/Round edges. Add edges

to the Items to Fillet list in the Fillet PropertyManager. Select the small edges, and then

fillet the larger edges.

PLATE Part - Hole Wizard Feature

The PLATE part requires a Countersink hole. Apply the Hole Wizard ~ feature. The

Hole Wizard creates simple and complex Hole features by stepping through a series of

options (Wizard) to define the hole type and hole placement. The Hole Wizard requires a

face or Sketch plane to position the Hole feature. Select the back face.

Activity: PLATE Part - Hole Wizard Feature

Rotate the view.

194) Click and drag the mouse pointer using the middle mouse key

to the left to rotate the part as illustrated. The Rotate icon ~

is displayed.

Display the Back view.

195) Click Back view ctj from the Heads-up View toolbar. The

Origin is displayed at the lower right corner.

Insert the Countersink hole.

196) Click the Hole Wizard ~ Feature tool. The Hole Specification

PropertyManager is displayed.

197) Click the Type tab. ~ Hole Specification (1)

./ x

198) Click the Countersink icon.
f]j Type ositions

'----------'---I
199) Select ANSI Metric for Standard. Favorite v

200) Select Flat Head Screw -ANSI B18.6.7M for Type.
~

201) Select M4 for Size. [affi

~
202) Select Through All End Condition. Accept the default settings.

Standard: .............
•~---~ v
203) Click the Positions tab. lANSI Metric

Type:

Select the Sketch plane for the Hole Wizard. Flat Head Screw - ANSI B 18.6.

204) Click the middle back face of Base-Extrude as illustrated. The Hole Specifications

Size:

Point ~ tool is selected. M4 - ~ v

Fit:
205) Click again to place the center point of the hole. I Normal

O Show custom sizing
206) Right-click Select in the

End Condition '-. A
Graphics window to de-select the ~

Point tool. . . ~ Through All -

... Options

O Head clearance

• 0 Far side countersink

PAGE 2 - 43