Page 207 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLIDWORKS® 2018 Fundamentals of Assembly Modeling

GUIDE-ROD Assembly - Collision Detection

The Collision Detection assembly function detects collisions between components as they

move or rotate. A collision occurs when geometry on one component coincides with

geometry on another component. Place components in a non-colliding position, then test

for collisions.

Activity: GUIDE-ROD Assembly - Collision Detection

Display the GUIDE and apply the Collision Detection tool.

1
108) Right-click GUIDE ~ ~ (f) GUIDE< > (Default· from the

FeatureManager. ~d~~® !~~~ rm

fe~" -

Show Components -
109) Click Show Components <1t1 from the Context tool bar. The ~
Invert Se1ec1:1on

GUIDE is displayed in the Graphics window.

" Go To ...
I•

Component (GUIDE)

110) Click Shaded with Edges t) from the Heads-up View

tool bar.

Move the PLATE behind the GUIDE.

111) Click the Move Component [Jl Assembly tool. The

Move Component PropertyManager is displayed.

112) Drag the PLATE backward until the PLATE clears the

GUIDE. The PLATE is free to translate along the Z-axis.

Apply the Collision Detection tool.

113) Click the Collision Detection checkbox. Un-check the

Stop at collision box if needed.

114) Check the All components box.

Options

115) Check Highlight faces, Sound and Ignore complex ([) Standard Drag

surfaces from the Advanced Options box. @ collision Detection

() Physical Dynamics

116) Drag the PLATE forward. The GUIDE back, top and Check between:

angled right faces turn blue when the PLATE front face @ All components

collides with the back face of the GUIDE. The ROD is blue (('.:) These components

due to an interference with the GUIDE hole. D Stop at collision

[j Dragged part only

Return the PLATE to the original position. D Dynamic Clearance v

117) Drag the PLATE backward until the ROD is approximately

Advanced Options
halfway through the GUIDE.
[t] Highlight faces

['.{] sound

118) Click OK ~ from the Move Component ! ./ I Ignore complex surfaces

PropertyManager. []This configuration

PAGE 3 - 29