Page 27 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLID\VORKS" 2018 Introduction

Project 10: Additive Manufacturing - 30 Printing

•

Project JO provides a basic understanding between the differences of Additive vs.
Subtractive Manufacturing. Comprehend 30 printer terminology along with a working
knowledge of preparing, saving, and printing a 30 CAD model on a low cost ($500 -

$3,000) printer.

On the c-0mpletion of this project, you will be able to:

• Discuss Additive vs Subtractive Manufacturing.

• Detennine the differences between a Cartesian printer and a Delta printer.

• Create a STereoLithography (STL) fi le in SOLID\VORKS.

• 30 print directly from SOLID WORKS using an Add-In.

• Save an STL fi le to G-e-0de.

• Discuss printer hardware.

• Select the correct filament type:

• PLA (Polylactic acid), ABS (Acrylonitrile butadiene styrene) or Nylon.

• Prepare the G-code.

• Address model setup, print orientation, extruder temperature, and bed ten1perature.

• Comprehend the following 30 printer terminology:

• (STereoLithography) fi le - STL.

• Fused Fila,nent Fabrication - FFF .

• Fused Deposition Model - FDM .

• Digital Light Process - OLP .

• Dissolvable Support System - DDS .

• Raft, Skirt and Brin1 .

• Support and Touching Buildplate .

• Slicer.

• G-e-0de.

• Address fit tolerance for interlocking parts.

• Define general 3 D Printing tips.

PAGE 1-23