Page 443 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLIDWORKS® 2018 Extrude and Revolve Features

575) Rotate the part to display the faces that require a draft. The faces

are displayed in different colors. View the results in the Graphics

~ DraftXpert G)
window.

x t...-J

.-i.r - -.-------,
OK I Manual loraftXpert!

576) Click OK ~ from the DraftXpert PropertyManager. Draft1 is Add Change

displayed. Items to Draft "'

tf J , deg v 1 :

By default, the faces that require draft are displayed in red. The Top ~ l ~IFace-<1> -~I

Cut, Extruded Cut, and the Holes Extruded Cut requires a draft. The (ii:)

bottom flat surface will become the Parting surface.

•

[ Apply

Modify the BATTERYPLATE part In-Context of the MOLD- Draft Analysis

TOOLING part. Both parts are open during the modification E2] Auto paint

• ~ Positive draft
session.

1.00

dJ Top Plan~e ----~,

Modify the BATTERYPLA TE In-Context. dJ Right Pia • ! C) +, 0.50

'~ p J. ~ ·
l. Origin
577) Right-click BATTERYPLATE in the

FeatureManager. • Q BATI[R Feature (BATTERYPLATE 0.00

Fe) Solie £d' In Context Negative draft

~ Draft1

578) Click Edit In Context. The BATTERYPLATE

FeatureManager is displayed.

Insert Draft into the Top Cut.

579) Right-click Top Cut in the BATTERYPLATE

FeatureManager.

580) Click Edit Feature ~ . The Top Cut

PropertyManager is displayed.

581) If needed, click the Draft on/off button. Enter 1deg

~,~1~:$ !~1

for Draft Angle. Click OK #' from the Top Cut

Q00 Holes G)
PropertyManager.

~ x ®

Insert a draft into the holes. From

Sketch Plane v
582) Right-click Holes in the BATTERYPLATE

Direction 1

FeatureManager. Click Edit Feature ~ . The [I] Through All v

Holes PropertyManager is displayed. If needed, ,,. -----

click the Draft on/off button. Enter 1 deg for Draft

D Flip side to cut
Angle. Click OK ~ from the Holes ~

1deg
PropertyManager. ~·

_ Draft On/Off ard

D Direction 2 v
Return to the MOLD-TOOLING part.

Selected Contours v
583) Press Ctrl-Tab. The MOLD TOOLING

FeatureManager is displayed.

584) Rebuild I the model.

PAGE5-75