Page 25 - Handbook of Electrical Engineering
P. 25

4    HANDBOOK OF ELECTRICAL ENGINEERING

                                         Table 1.2.  Vital and essential AC loads

                            Vital AC loads                     Essential AC loads
                            UPS supplies                 Diesel fuel transfer pumps
                            Emergency lighting           Main generator auxiliaries
                            Emergency generator auxiliaries  Main compressor auxiliaries
                            Helicopter pad lighting      Main pump auxiliaries
                            Control room supplies        Diesel fire pump auxiliaries
                            Vital LV pumps               Electric fire pumps
                                                         Living quarters
                                                         Air compressor
                                                         General service water pumps
                                                         Fresh water pumps
                                                         Equipment room HVAC supplies
                                                         Life boat davits
                                                         Anti-condensation heaters in
                                                           panels and switchboards
                                                         Security lighting supplies
                                                         Control room supplies
                                                         UPS supplies
                                                         Radio supplies
                                                         Computer supplies
                                                         Battery chargers for engine
                                                           starting systems
                                                         Instrumentation supplies



                                              Table 1.3.  Vital DC loads
                                            Public address system
                                            Plant alarm systems
                                            System shutdown system
                                            Telemetry systems
                                            Emergency radio supplies
                                            Fire and gas detection system
                                            Navigation aids



                    Hence each switchboard will usually have an amount of all three of these categories. Call
              these C for continuous duty, I for intermittent duty and S for the standby duty. Let the total amount
              of each at a particular switchboard j be C jsum , I jsum and S jsum . Each of these totals will consist of
              the active power and the corresponding reactive power.
                    In order to estimate the total consumption for the particular switchboard it is necessary to
              assign a diversity factor to each total amount. Let these factors be D cj for C sumj , D ij for I sumj and
              D sj for S sumj . Oil companies that use this approach have different values for their diversity factors,
              largely based upon experience gained over many years of designing plants. Different types of plants
              may warrant different diversity factors. Table 1.4 shows the range of suitable diversity factors. The
              factors should be chosen in such a manner that the selection of main generators and main feeders from
              a power utility company are not excessively rated, thereby leading to a poor choice of equipment in
              terms of economy and operating efficiency.
   20   21   22   23   24   25   26   27   28   29   30