Page 258 - Industrial Cutting of Textile Materials

Multi-ply processing of styles from intricate pattern textiles 245

Fig. 15.7 Cutting out components into approximate rectangles from checked fabric.

8 7 6
9

5
4

2

3
1

Fig. 15.8 Cutting out components into approximate rectangles from fabric with motive
pattern.

Respreading those roughly cut components with their pattern aligned precisely along one cut
●
edge.
Respreading roughly cut components with the pattern aligned by the careful positioning of
●
each ply onto pins set on a spreading table.
Respreading of symmetrical components in one lay with the bottom half of the lay spread
●
face down and the top half of the lay spread face up.
The roughly cut components are respread on an underlay paper that is also cut
during the rough cutting. As the paper has a dense structure, it maintains the original