Page 279 - System on Package_ Miniaturization of the Entire System

Mixed-Signal (SOP) Design 253

30. V. Palazzari, S. Pinela, J. Laskar, L. Roselli, and M. Tentezeris, “Design of an
asymmetrical dual-band WLAN filter in liquid crystal polymer (LCP) system-on-
package technology”, IEEE Microw. and Wireless Comp. Lett., vol. 15, March 2005,
pp. 165–167.
31. R. Bairasubramaniam, S. Pinel, J. Papapolymerou, J. Laskar, C. Quendo, E. Rius,
A. Manchec, and C. Person, “Dual-band filters for WLAN applications on LCP
technology,” in IEEE MTT-S Int. Microwave Symp. Dig., June 2005.
32. C. Quendo, E. Rius, and C. Person, “An original topology of dual-band filter with
transmission zeros,” IEEE IMS, June 2003, pp. 1093–1096.
33. C. Quendo, E. Rius, A. Manchec, Y. Clavet, B. Potelon, J.-F. Fanvennec, and C.
Person, “Planar tri-band filter based on dual behavior resonator (DBR)” EUMC,
October 2005, pp. NA.
34. N. Marchand, “Transmission-line conversion transformers,” Electronics, vol. 17,
no. 12, December 1944, pp. 142–145.
35. G. Oltman, “The compensated balun,” IEEE Transactions on Microwave Theory and
Techniques, vol. 44, no. 3, March 1966, pp. 112–119.
36. K. S. Ang, Y. C. Leong, and C. H. Lee, “Analysis and design of miniaturized
lumped-distributed impedance-transforming baluns,” IEEE Transactions on
Microwave Theory and Techniques, vol. 51, March 2003, pp. 1009–1017.
37. J.-W. Lee and K. J. Webb, “Analysis and design of low-loss planar microwave
baluns having three symmetric coupled lines,” IEEE MTT-S International Microwave
Symposium Digest, June 2002, pp. 117–120.
38. V. Govind, W. S. Yun, S. Dalmia, V. Sundaram, G. E. White, and M. Swaminathan,
“Analysis and design of compact wideband baluns on multilayer liquid crys-
talline polymer (LCP) based substrates,” IEEE MTT-S International Microwave
Symposium (IMS) Digest, Long Beach, CA, June 2005.
39. D.-W. Lew, J.-S. Park, D. Ahn, N.-K. Ahn, C. S. Yoo, and J.-B. Lim, “A design of
the ceramic chip balun using the multilayer configuration,” IEEE Transactions on
Microwave Theory and Techniques, vol. 49, January 2001, pp. 220–224.
40. R. K. Feeney, Private Communication, Course RF Engineering I, Georgia Institute
of Technology.
41. K. Wang, M. Frank, P. Bradley, R. Ruby, W. Mueller, A. Barfknecht, and M. Gat,
“FBAR Rx filters for handset front-end modules with wafer-level packaging,”
Proceedings of the IEEE Symposium on Ultrasonics, October 2003, pp. 162–165.
42. J. Kaitila, M. Ylilammi, J. Molarius, J. Ella, and T. Makkonen, “ZnO based thin film
bulk acoustic wave filters for EGSM band,” Proceedings of the IEEE symposium on
Ultrasonics, October 2001, pp. 803–806.
43. S. Dalmia, “Design and Implementation of High-Q Passive Devices for Wireless
Applications using System-on-Package (SOP) based Organic Methodologies,”
PhD Dissertation, School of Electrical and Computer Engineering, Georgia
Institute of Technology, Atlanta, 2002.
44. S. Dalmia, V. Sundaram, M. Swaminathan, and G. White, “Liquid crystalline poly-
mer (LCP) based lumped-element bandpass filters for multiple wireless applica-
tions,” IEEE Int. Microw. Symp., June 2004, pp. 1991–1994.
45. A. Bavisi, S. Dalmia, V. Sundaram, M. Swaminathan, and G. White, “Chip-package
codesign of integrated voltage-controlled oscillator in LCP substrate,” IEEE Trans.
Adv. Packaging, vol. 29, issue 3, Aug. 2006, pp. 390–402.
46. D. K. Shaeffer and T. H. Lee, “A 1.5-V 1.5-GHz CMOS low noise amplifier,” IEEE
Journal of Solid-State Circuits, vol. 32, May 1997, pp. 745–759.