Page 703 - Engineering Digital Design

FURTHER READING 669

Good coverage of the use of registered PLDs in digital system design can be found in
the texts by Bolton, Carter, Katz (previously cited), Lala, Pellerin and Holley, and Wakerly,
and these are recommended for further reading. For the automatic logic design of digital
systems, the book by Edwards is recommended.

[6] M. Bolton, Digital Systems Design with Programmable Logic. Addison-Wesley, Reading, MA,
1990.
[7] J. W. Carter, Digital Designing with Programmable Logic Devices. Prentice Hall, Englewood
Cliffs, NJ, 1997.
[8] T. K. Edwards, Automatic Logic Synthesis for Digital Systems. McGraw-Hill, New York, 1992.
[9] P. K. Lala, Digital System Design Using Programmable Logic Devices. Prentice Hall, Englewood
Cliffs, NJ, 1990.
[10] D. Pellerin and M. Holley, Practical Design Using Programmable Logic. Prentice Hall, Engle-
wood Cliffs, NJ, 1991.
[11] J. F. Wakerly, Digital Design Principles and Practices, 2nd ed. Prentice-Hall, Englewood Cliffs,
NJ, 1994.
The one-hot method in state machine design is apparently offered for significant further
reading in only two texts, those by Hayes and by Nelson et al. (previously cited). Both
contribute something different to the subject and are recommended. To a lesser extent this
subject is covered in the text by Comer.

[12] D. J. Comer, Digital Logic and State Machine Design, 3rd ed. Saunders College Publishing, Fort
Worth, TX, 1995.
[13] J. P. Hayes, Introduction to Digital Design. Addison-Wesley, Reading, MA, 1993.

Other sources for further reading on the subject of system-level design where examples
are provided are found in the texts by Fletcher (previously cited) and Shaw.

[14] A. W. Shaw, Logic Circuit Design. Sanders College Publishing, Fort Worth, TX, 1993.

For the reader who wishes to have more information on stepping motors, mentioned in
this chapter in connection with a stepping motor controller design, the book by Kenjo is
recommended.

[15] T. Kenjo, Stepping Motors and Their Microprocessor Controls. Oxford University Press, 1984.
Finally, it should be noted that for logic system design by using registered PLDs, PLSs,
and FPGAs, there may be no better sources than the data books published by Advanced
Micro Devices, Signetics, Xilinx, Actel, and Altera. GAL devices are covered by Lattice
Semiconductor's data book. For EPLD component specifications and applications, the
reader will find Intel's data book useful.

[16] ACT Family Field Programmable Gate Array Databook. Actel Corp., Sunnyvale, CA, 1991.
[17] Altera Data Book. Altera Corp., San Jose, CA, 1995.
[18] GAL Data Book. Lattice Semiconductor, Hillsboro, OR, 1992.
[19] PAL Device Data Book. Advanced Micro Devices, Inc., Sunnyvale, CA, 1992.
[20] Programmable Gate Array Data Book. Xilinx, Inc., San Jose, CA, 1995.