Page 109 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLIDWORKS® 2018 Fundamentals of Part Modeling

112) Click a center point on the front face diagonally to the

right of the Origin as illustrated.

113) Click a position to the right of the center point. The - R = 3.49

circumference and the center point are selected. G 0 -

Copy the first circle.

114) Right-click Select in the Graphics window to deselect

the circle Sketch tool.

115) Hold the Ctrl key down. 0 --•Ill 0

116) Click and drag the circumference of the first circle to

the right.

,~,~ lfi8 1$ ~I

117) Release the mouse button.

II I Properties G)

118) Release the Ctrl key. The second circle is displayed.

.; ~

119) Click a position in the Graphics window, off the sketch.

Selected Entities A
The first and second circles are displayed in blue. Arc1

Arc2

•
Add an Equal relation between the circles.

Existing Relations A
120) Click the circumference of the first circle.
_h Equal radiusO

121) Hold the Ctrl key down.

122) Click the circumference of the second circle. CD Under Defined

,,,
123) Release the Ctrl key. Arc1 and Arc2 are displayed in Add Relations A

the Selected Entities text box in the Properties '--' Coradial

PropertyManager. °' Tangent

, ..... -. @ Concentric
.
.
.
.
124) Click Equal L.: ... 1 from the Add Relations box. The Equal r • • • I
I = I Equal

radius/length is displayed in the Existing Relations text box. ~~

fix

,-... Equal Curve .Length
-
125) Click OK ~ from the Properties PropertyManager.

Options A
, 1 /
D For t onstruction

-;Q~ You can right-click the Make Equal tool from the Context

toolbar.

The SOLIDWORKS default name for curve entities is Arc#.

There is an Arc# for each circle. The default name for any point

is Point#. The two center points are entities named Point2 and

Point4.

, 1 /

Selected Entities
-;Q~ To remove unwanted entities from the Selected

Entities box, right-click in the Selected Entities window.

Arc2 Clear Selections
Click Clear Selections. The Selected Entities # differs if

geometry was deleted and recreated. The Existing Delete

Relations box lists Equal radius/lengthO. Existing Rela

_h Equal r · Customize Menu

PAGE 2-37