Page 128 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Fundamentals of Part Modeling Engineering Design with SOLIDWORKS 2018

312) Enter 15mm for the Depth in Direction 1. Accept the default ~ ~ llt8 1$ J I

settings. Blind is the default End Condition.

~ Cut-Extrude (1)

., x ®
313) Click OK ~ from the Cut-Extrude PropertyManager.

Cut-Extrude1 is displayed in the FeatureManager. From "'

[sketch Plane ~
Rename the feature and sketch.

Direction 1 "'

314) Rename Cut-Extrude1 to Keyway Cut.
~ Blind v

315) Expand Keyway Cut from the )IC

FeatureManager.

(6t !1 s.oomm EEi

316) Rename Sketch4 to Keyway.

D Flip side to cut

Exit the sketch. ~ ._[ ----'=="ffil

317) Exit the sketch. L.. Draft outward

Fit the model to the Graphics window. ... ~ Base Extrude

318) Press the f key. [__ Sketch1

Save the ROD. ... ~ Front Hole

319) Click Save lii. [__ Sketch2

[__ Sketch3
, ,/

~ Chamfer1
;Q~ Rename features or sketches in the FeatureManager by

... ~ Keyway Cut

slowly clicking the name twice and entering the new name when [__ Keyway

the old one is highlighted.

, ,/

;Q~ Utilize the Save as copy and continue command to save the document to a new file

name without replacing the active document. Utilize the Save as copy and open command

to save the document to a new file name that becomes the active document. The original

document remains open. References to the original document are not automatically

assigned to the copy.

The Extruded Cut feature created the Keyway Cut by converting existing geometry. The

Hole Wizard feature created the Front Simple Hole on the front face.

The Convert Entities tool extracts feature geometry. Copy features utilizing the

Copy/Paste Edit option.

, ,/ System Options Document Properties

;Q~ To remove Tangent edges, click General Hidden edges displayed as

Drawings Q Solid

Display from the Options menu, and check I Display Style @ Dashed

!
~·· Area Hatch/Fill
the Removed box. L Performance Part/Assembly tangent edge display

Colors 0As visible

Sketch
; QAs phantom
L. Relations/Snaps

t Removed

Selection Edge display in shaded with edges mode

PAGE2 - 56