Page 237 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLIDWORKS® 2018 Fundamentals of Assembly Modeling

375) Click Front view ~ . The GUIDE-ROD assembly updates

to display the changes to the GUIDE part.

Return to an Isometric view - Shaded With Edges.

376) Click Isometric view ~ .

377) Click Shaded With Edges e.

•
•
•
Save the GUIDE-ROD assembly. •
•
•
•
•
•
378) Click Save fii. •
•
•
•

, ,/

File Fdit ViC'W Insert Tools Window Help ,t LI •
iJs SOLIDWORKS
-;Q~ SOLIDWORKS provides an Interference
Y.V ~ ~ (2) 0 l:J ~Check

Detection tool and a Clearance Verification tool to Design Measure Mass Section Sensor Performance @ Geometry Analysi

Study Properties Properties Lvaluation II"' [1
•
analyze assemblies. See SOLIDWORKS help for

Features I Sketch ' Evaluate { DimXpert SOLIDWORKS Add Ins I SOLIDW<

additional information. __._ ·, ""

, ,/

-;Q~ Analyze issues at the part level first. Working at the part
. . . I ~ @·

level reduces rebuild time and complexity. Return to the

~ [II Save

assembly and review the modifications.
~ Q1l Save As
2

~ C~ Save All

The last component to insert to the GUIDE-CYLINDER is < t~ Publish eDrawings File

the 3MMCAPSCREW. Utilize the Save As/Save as copy and

open option to copy the 4MMCAPSCREW to create the

3MMCAPSCREW part.

Save As/Save as Copy Options

File name: 3MMCAPSCREW.SLDPRT

Save as type: Part (*.prt*.sldprt)

Conserve design time and cost. Modify existing parts Description: CAP SCREW. 3MM

Include all referenced components
and assemblies to create new parts and assemblies. @ Save as ( _ Add prefix :
0 Save as copy and continue

Utilize the Save As/Save as command to save the file in O Save as copy and open ( Add suffix . 11 Advanced ]

• Hide Folders
another file format.

Utilize the Save as copy and continue command to save

the document to a new file name without replacing the

active document. Utilize the Save as copy and open command to save the

document to a new file name that becomes the active document. The original

document remains open. References to the original document are not l

automatically assigned to the copy.

The 4MMCAPSCREW was created earlier. The GUIDE requires

3MMCAPSCREWs to fasten the sensor to the 3mm Tapped Hole Linear

Pattern.

PAGE 3- 59