Page 387 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLIDWORKS® 2018 Extrude and Revolve Features

Dimension the sketch.

56) Click the Smart Dimension (' Sketch tool.

57) Click the top horizontal line.

58) Click a position above the horizontal line. ,
' /
" / ,
'
59) Enter 2.700in, [68.58] for width. " / ,
'
" ' , / ,
•
"

•
60) Click the Green Check mark ~ in the Modify [68.58] " ' / , / , /
"

dialog box. 2.700 , '

/
,
/
,
61) Enter 2.700in, [68.58] for height as illustrated. , / '
•
/ "
, "
•
, / "
'
62) Click the Green Check mark ~ in the Modify , /
'
, / "
'
dialog box. The black Sketch status is fully "

defined. Click OK ~ from the Dimension

PropertyManager.

Exit the Sketch.

63) Click Exit Sketch.

Insert an Extruded Boss/Base feature. Apply the Instant3D tool.

The Instant3D tool provides the ability to drag geometry and

dimension manipulator points to resize or to create

features directly in the Graphics window.

Display an Isometric view. Use the on-screen ruler.

64) Press the space bar to display the Orientation

dialog box. Click Isometric view ~ .

65) Click the front horizontal line as illustrated. A

green arrow is displayed.

66) Click and drag the arrow upward.

67) Click the on-screen ruler at 4.1 in, [104.14] as

illustrated. This is the depth in direction 1. The

extrude direction is upwards. Boss-Extrude1 is

displayed in the FeatureManager.
~ e ll8 $ ~

Check the Boss-Extrude1 feature depth dimension. ~ Boss-Extrude1 G)
.,

68) Right-click Boss-Extrude1 from the x ®

FeatureManager. From A

Sketch Plane v

Direction 1 A

69) Click Edit Feature ~ from the Context ;i"] [Blind v

tool bar. 4.1 OOin is displayed for depth. Blind is ~ i

the default End Condition. Note: If you did not I

(ci ~.100in I : I
select the correct depth, input the depth in the ~ •

Boss-Extrude 1 PropertyManager. ~ •

L Draft outward

D Direction 2 v
70) Click OK ~ from the Boss-Extrude1

Selected Contours v
PropertyManager.

PAGE 5 - 19