Page 405 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS
P. 405
Engineering Design with SOLIDWORKS® 2018 Extrude and Revolve Features
204) Click OK ~ from the Offset Entities PropertyManager. Drag
Direction 1
the dimension off the model. Two offset concentric circles
~ ~[Bli_nd ____ ~v]
define the sketch.
~
Insert an Extruded Boss/Base feature.
205) Click the Extruded Boss/Base ~ feature tool. The ~ 0.400in •
--
Boss-Extrude PropertyManager is displayed. 121 Merge result
206) Enter .400in, [10.16] for Depth in Direction 1. •
207) Click the Draft ON/OFF button.
208) Enter 3deg in the Angle box.
209) Click OK ef from the Boss-Extrude PropertyManager. The
Boss-Extrude1 feature is displayed in the FeatureManager.
Rename the feature.
21 O) Rename the Boss-Extrude1 feature to Holder in the
FeatureManager.
Save the model.
211) Click Save lli.
BATTERYPLATE Part- Fillet Features: Full ~1~ 1~1$ 1
(B Fillet
Round and Multiple Radius Options
Use the Fillet fB feature tool to smooth rough edges in a I Manual I FilletXpertl
model. Plastic parts require fillet features on sharp edges. Fillet Type
Create two Fillets. Utilize different techniques. The current ~~~
Top Face Fillet produced a flat face. Delete the Top Face Items To Fillet Full Round Fillet
Fillet. The first Fillet feature is a Full round fillet. Insert a
Full round fillet feature on the top face for a smooth 0
rounded transition.
0
The second Fillet feature is a Multiple Size fillet. Select a
0
different radius value for each edge in the set. Select the 0
121 Tangent propagation
inside and outside edge of the Holder. Select all inside
@ Full preview
tangent edges of the Top Cut. A Multiple Size fillet is
O Partial preview
utilized next as an exercise. There are machining instances
O No preview
where radius must be reduced or enlarged to accommodate
tooling. Note: There are other ways to create Fillets.
, 1 /
-;Q~ Group Fillet features into a Fillet folder. Placing Fillet features into a folder reduces
the time spent for your mold designer or toolmaker to look for each Fillet feature in the
F eatureManager.
PAGE 5-37
