Page 410 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS
P. 410
Extrude and Revolve Features Engineering Design with SOLIDWORKS® 2018
LENS Part
Create the LENS. The LENS is a purchased part. The LENS
utilizes a Revolved Base feature.
Sketch a centerline and a closed
profile on the Right Plane. Insert a ~ R4.000
Revolved Base feature. The
Revolved Base feature requires an 2.000
axis of revolution and an angle of •
revolution. .400
a
Insert the Shell feature. The Shell
feature provides uniform wall
thickness. Select the front face as the
face to be removed.
Utilize the Convert Entities sketch tool to extract
the back circular edge for the sketched profile.
Insert an Extruded Boss feature from the back of
the LENS.
Sketch a single profile. Insert a Revolved
,--(2.54]
Thin feature to connect the LENS to the R.100
BATTERYPLATE. The Revolved Thin
. .. ~ ..
feature requires thickness.
PAGE 5-42
