Page 503 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLIDWORKS® 2018 Swept, Lofted and Additional Features

Insert an Extruded Boss/Base (Boss-Extrude 1) ~

feature centered at the Origin.

Insert a Lofted Boss ~ feature. The first profile is the

converted circular edge of the Extruded Base. The

second profile is a sketch on the BatteryLoftPlane.

Insert the second Extruded Boss/Base (Boss-Extrude2) ~

feature. The sketch is a converted edge from the Loft Boss.

The depth is determined from the height of the BATTERY.

Insert a Shell rfBl feature to create a thin walled part.

Insert the third Extruded Boss (Boss-Extrude3) ~ feature.

Create a solid circular ring on the back circular face of the

Boss-Extrude 1 feature. Insert the Draft feature to add a draft

angle to the circular face of the HOUSING. The design intent

for the Boss-Extrude 1 feature requires you to maintain the

same LENSCAP draft angle.

Insert a Swept I!' feature for the Thread. Insert a Swept

feature for the Handle. Reuse the Thread profile from the

LENSCAP part. Insert an Extruded Cut to create the hole for

the SWITCH.

Insert the Rib I feature on the back face of the HOUSING.

Insert a Linear Pattern ~g feature to create a row of Ribs.

Insert a Rib I feature along the bottom of the HOUSING.

Utilize the Mirror Oa~ feature to create the second Rib.

PAGE 6 -31