Page 348 - Characterization and Properties of Petroleum Fractions - M.R. Riazi

T1: IML
QC: IML/FFX
P2: IML/FFX
P1: IML/FFX
AT029-07
AT029-Manual-v7.cls
AT029-Manual
June 22, 2007
17:40
328 CHARACTERIZATION AND PROPERTIES OF PETROLEUM FRACTIONS
REFERENCES
[18] Tsonopoulos, C., Heidman, J. L., and Hwang, S.-C.,
Thermodynamic and Transport Properties of Coal Liquids,An
[1] Carlson, E. C., “Don’t Gamble with Physical Properties for Exxon Monograph, Wiley, New York, 1986.
Simulations,” Chemical Engineering Progress, Vol. 92, No. 10, [19] Wilson, G. M., Johnston, R. H., Hwang, S. C., and Tsonopoulos,
October 1996, pp. 35–46. C., “Volatility of Coal Liquids at High Temperatures and
[2] Alberty, R. A. and Silbey, R. J., “Physical Chemistry,” 2nd ed., Pressures,” Industrial Engineering Chemistry, Process Design
Wiley, New York, 1999. and Development, Vol. 20, No. 1, 1981, pp. 94–104.
[3] Hirschfelder, O. J., Curtiss, C. F., and Bird, R. B., Molecular [20] Marks, A., Petroleum Storage Principles, PennWell, Tulsa, OK,
Theory of Gases and Liquids, Wiley, New York, 1964. 1983.
[4] Bhagat, Ph., “An Introduction to Neural Nets,” Chemical [21] Sandler, S. I., Chemical and Engineering Thermodynamics, 3rd
Engineering Progress, Vol. 86, No. 8, August 1990, pp. 55–60. ed., Wiley, New York, 1999.
[5] Riazi, M. R. and Elkamel, A., “Using Neural Network Models to [22] Levine, I. N., Physical Chemistry, 4th ed., McGraw-Hill, New
Estimate Critical Constants,” Simulators International, Vol. 29, York, 1995.
No. 3, 1997, pp. 172–177. [23] Lenoir, J. M. and Hipkin, H. G., “Measured Enthalpies of Eight
[6] Lee, M.-J., Hwang,, S.-M., and Chen, J.-T., “Density and Hydrocarbon Fractions,” Journal of Chemical and Engineering
Viscosity Calculations for Polar Solutions via Neural Data, Vol. 18, No. 2, 1973, pp. 195–202.
Networks,” Journal of Chemical Engineering of Japan, Vol. 27, [24] Kesler, M. G. and Lee, B. I., “Improve Prediction of Enthalpy of
No. 6, 1994, pp. 749–754. Fractions,” Hydrocarbon Processing, Vol. 55, No. 3, 1976,
[7] Press, J., “Working with Non-Ideal Gases,” Chemical pp. 153–158.
Engineering Progress, Vol. 99, No. 3, 2003, pp. 39–41. [25] ASTM, Annual Book of Standards, Section Five, Petroleum
[8] Engineering Data Book, Vol. II, Sections 17–26, 10th ed., Gas Products, Lubricants, and Fossil Fuels (in 5 Vols.), ASTM
Processors (Suppliers) Association, Tulsa, OK, 1987. International, West Conshohocken, PA, 2002.
[9] Daubert, T. E. and Danner, R. P., Eds., API Technical Data [26] Speight, J. G., The Chemistry and Technology of Petroleum, 3rd
Book—Petroleum Refining, 6th ed., American Petroleum ed., Marcel Dekker, New York, 1999.
Institute (API), Washington, DC, 1997. [27] Riazi, M. R. and Roomi, Y., “Use of the Refractive Index in the
[10] AIChE DIPPR R Database, Design Institute for Physical Estimation of Thermophysical Properties of Hydrocarbons and
Property Data (DIPPR), EPCON International, Houston, TX, Their Mixtures,” Industrial and Engineering Chemistry
1996. Research, Vol. 40, No. 8, 2001, pp. 1975–1984.
[11] Hall, K. R., Ed., TRC Thermodynamic Tables—Hydrocarbons, [28] Riazi, M. R. and Daubert, T. E., “Characterization Parameters
Thermodynamic Research Center, The Texas A&M University for Petroleum Fractions,” Industrial and Engineering Chemistry
System, College Station, TX, 1993. Research, Vol. 26, 1987, pp. 755–759. Corrections, p. 1268.
[12] Poling, B. E., Prausnitz, J. M., and O’Connell, J. P., Properties of [29] Eubank, P. T. and Wang, X., “Saturation Properties from
Gases and Liquids, 5th ed., McGraw-Hill, New York, 2000. Reid, Equations of State,” Industrial and Engineering Chemistry
R. C., Prausnitz, J. M., Poling, B. E., Eds., Properties of Gases Research, Vol. 42, No. 16, 2003, pp. 3838–3844.
--`,```,`,``````,`,````,```,,-`-`,,`,,`,`,,`---
and Liquids,4th ed., McGraw-Hill, New York, 1987. [30] Wauquier, J.-P., Petroleum Refining, Vol. 1: Crude Oil,
[13] Yaws, C. L. and Yang, H.-C., “To Estimate Vapor Pressure Petroleum Products, Process Flowsheets, Editions Technip,
Easily,” Hydrocarbon Processing, Vol. 68, 1989, pp. 65–68. Paris, 1995.
[14] Feyzi, F., Riazi, M. R., Shaban, H. I., and Ghotbi, S., [31] Smith, J. M., Van Ness, H. C., and Abbott, M. M., Introduction
“Improving Cubic Equations of State for Heavy Reservoir to Chemical Engineering Thermodynamics, 5th ed.,
Fluids and Critical Region,” Chemical Engineering McGraw-Hill, New York, 1996.
Communications, Vol. 167, 1998, pp. 147–166. [32] Felder, R. M. and Rousseau, R. W., Elementary Principles of
[15] Korsten, H., “Internally Consistent Prediction of Vapor Chemical Processes, 2nd ed., Wiley, New York, 1986.
Pressure and Related Properties,” Industrial and Engineering [33] Mang, R. A., “Clean Energy for the Hydrogen Planet,” The
Chemistry Research, Vol. 39, 2000, pp. 813–820. Globe and Mall, Canada’s National Newspaper, June 9, 2003,
[16] Lee, B. I. and Kesler, M. G., “A Generalized Thermodynamic Page H1.
Correlation Based on Three-Parameter Corresponding States,” [34] Manafi, H., Mansoori, G. A., and Ghotbi, S., “Phase Behavior
American Institute of Chemical Engineers Journal, Vol. 21, 1975, Prediction of Petroleum Fluids with Minimum
pp. 510–527. Characterization Data,” Journal of Petroleum Science &
[17] Maxwell, J. B. and Bonnell, L. S., Vapor Pressure Charts for Engineering, 1999, Vol. 22, pp. 67–93.
Petroleum Engineers, Exxon Research and Engineering [35] Riazi, M. R. and Whitson, C. H., “Estimating Diffusion
Company, Florham Park, NJ, 1955. Reprinted in 1974. Coefficients of Dense Fluids,” Industrial and Engineering
“Deviation and Precision of a New Vapor Pressure Correlation Chemistry Research, Vol. 32, No. 12, 1993, pp. 3081–3088.
for Petroleum Hydrocarbons,” Industrial and Engineering [36] Firoozabadi, A., Thermodynamics of Hydrocarbon Reservoirs,
Chemistry, Vol. 49, 1957, pp. 1187–1196. McGraw-Hill, New York, 1999.

Copyright ASTM International
Provided by IHS Markit under license with ASTM Licensee=International Dealers Demo/2222333001, User=Anggiansah, Erick
No reproduction or networking permitted without license from IHS Not for Resale, 08/26/2021 21:56:35 MDT