Page 247 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Engineering Design with SOLIDWORKS® 2018 Fundamentals of Assembly Modeling

CUSTOMER Assembly

Three documents for this project are contained in the

MGPM12-1010

ENGDESIGN-W-SOLIDWORKS\ VENDOR

• MGPM12-1010_MGPRod(12M)

COMPONENTS folder. Copy the folder directly to your

._ MGPM12-1010_MGPTube(12M)

hard drive. Work directly from your hard drive.

The MGPM12-1010_MGPTube(12M) part and MGPM12-

1010_MGPRod(12M) part contain references to the

MGPM12-1010 assembly.

, ,/

-;Q::. When parts reference an assembly, open the assembly first. Then open the individual

parts from within the Assembly FeatureManager.

Create the CUSTOMER assembly. The CUSTOMER assembly combines the GUIDE-

ROD assembly and the GUIDE-CYLINDER (MGPM12-10) assembly. The GUIDE-

ROD assembly is fixed to the CUSTOMER assembly Origin.

I Activity: Create the CUSTOMER Assembly

Copy the ENGDESIGN-W-SOLIDWORKS\VENDOR COMPONENTS folder.

441) Copy the ENGDESIGN-W-SOLIDWORKS\VENDOR .....---M- G_P_M-12--1-01_0 ____ __,

COMPONENTS folder to your hard drive (PROJECTS

MG PM12-1010 _MG P Rod (12M)
folder). Work from your hard drive.

" MGPM12-1010_MGPTube(12M)

Open the MGPM12-1010 assembly from your hard drive.

442) Double-click the MGPM12-1010 assembly from

the ENGDESIGN-W-SOLIDWORKS\VENDOR-

COMPONENTS folder. The MGPM12-1010

FeatureManager is displayed.

443) If needed, click Yes to rebuild.

Fit the model to the Graphics window.

444) Press the f key.

PAGE 3-69