Page 424 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Extrude and Revolve Features Engineering Design with SOLIDWORKS® 2018

~ o~ ~ l~ I ~ I..~-- _ >

~ Review of the LENS Part v

~ LENS (Default< <Default> _Dis "

~ History

The LENS feature utilized a Revolved Base feature. A Revolved feature (3:: Sensors

• IA:; Annotations

required an axis, profile and an angle of revolution. The Shell feature o-
j};" Equations

t :::ij Material <not specified>
created a uniform wall thickness. (P Front Plane

(jJ Top Plane

dJ Right Plane
You utilized the Convert Entities Sketch tool to create the Extruded 1... Origin

• JI BaseRevolve
Boss feature for the LensNeck. The Counterbore hole was created using [.. sketch1

the Hole Wizard feature. ~ LensShell

• di) LensNeck

l Sketch2

• ~ · Bu lb Hole
The Revolved Thin feature utilized a single 3 Point Arc. Geometric [_sketch4

relations were added to the silhouette edge to define the arc. The [__ Sketch3

• Ii) LensConnector
LensCover and LensShield utilized existing geometry to Offset and [_ sketch S

• ~ LensCover
Convert the geometry to the sketch. The Color and Optics [: Sketch6

PropertyManager determined the LensShield transparency. • LPnsShield

BULB Part

The BULB fits inside the LENS. Use the Revolved feature as the

Base feature for the BULB.

Insert the Revolved Base ~ feature from a sketched profile on the

Right Plane.

Insert a Revolved Boss ~ feature using a Spline sketched profile.

The profile utilizes a complex curve called a Spline (Non-Uniform

Rational B-Spline or NURB). Draw Splines with control points.

Insert a Revolved Cut Thin ~ feature at the base of the BULB. A

Revolved Cut Thin feature removes material by rotating an open

sketch profile about an axis.

Insert a Dome 8 feature at the base of the BULB. A Dome feature

creates spherical or elliptical shaped geometry. Use the Dome

feature to create the Connector feature of the BULB. The Dome

feature requires a face and a height value.

Ii]
Insert a Circular Pattern 1) (1 feature from an Extruded Cut feature.
8

PAGE5 - 56