Page 79 - The Ultimate Palm Robot

Color profile: Generic CMYK printer profile
Composite Default screen
Bots / The Ultimate Palm Robot/ Mukhar & Johnson / 222880-6 / Chapter 3

62 The Ultimate Palm Robot

white knob extending from the servo will be centered in the frame. Place a
servo into the frame and attach it to the frame using screws, nuts, and washers
from bag two of the kit. You will need four of each to attach the servo.

When each servo is securely attached to the frame, tighten all the nuts on
the frame and the servos. You will want to perform this on a flat surface so that
you ensure the frame remains flat when all the screws and nuts are tightened.

The Controller and the Deck
Start by peeling the paper off the acrylic. The acrylic deck has holes predrilled
into it. These holes will be used to attach the controller and a few other parts.
Since the acrylic is designed to support several different controllers, you will
not use all the holes.

P:\010Comp\Bots\880-6\ch03.vp
Monday, May 12, 2003 4:41:26 PM